Безэховая камера, полное соотв. ГОСТ Р 51318.16/ГОСТ Р 51317.4.3

HERMES 10
Для увеличения картинки наведите мышкой
HERMES 10HERMES 10
HERMES 10HERMES 10
Артикул: ЭК100008
НаличиеПо запросу
По запросу
По запросу
По запросу
Обзор
Свернуть Развернуть
Основные возможности и технические характеристики
   STANDARDS
Radiated EMI testing: Fully compliant with the following standards, from 30 MHz to 18 GHz:
 - CISPR 11,
 - CISPR 16-1-4,
 - CISPR 22,
 - CISPR 32,
 - EN 50147-2,
 - EN 55011,
 - EN 55022,
 - ANSI C63.4,

 Radiated EMS testing: Fully compliant with:
- IEC 61000-4-3 from 26 MHz to 18 GHz

 Radio standards:
- All ETSI standards referring to CISPR 16 and IEC 61000-4-3
 
 BASIC CONFIGURATION  
Shielded room 18030 x 12160 x 8440 mm (external shield to shield dimensions)
- Structural steel frame and stiffeners,
- 1 manual, single leaf, “knife edge” shielded door, with clear opening 1500 x 2130 mm, including maintenance kit,
- Raised floor, with metallic ground plane and 2 access hatches,
- 4 honeycomb air vents 300 x 600 mm, fitted with flanges,
- 2 feedthrough panels 1220 x 200 mm fitted with 2 N connectors and 2 feedthrough waveguides Ø 20 mm for fibre optics,
- 1 power line filter 2 lines (single phase + neutral) – 32 A – 230 V – 50 Hz,
- Electrical package: 1 main switchboard with appropriate protection, electric distribution and lighting,
- Absorbers lining
     * Ferrite tiles lining of the four side walls and ceiling,
     * Pyramidal matched hybrid absorbers HY45 (aqueous blue paint) lining of the most critical areas of the two side walls, back wall and ceiling (numerically simulated optimized design).
 OPTIONS  
- Other doors dimensions & types (single, double, sliding)
- Electric or pneumatic assistance for door latching
- Shielded control room, shielded amplifier room
- Turntable (any diameter, any load)
- Automatic antenna mast (1 to 4 m height scan)
- GPIB interface controller (for positioners remote control)
- Additional power filters, data filters and special connectors
- Video monitoring CCTV system, Intercom/Audio monitoring system
- Vinyl tiles on the floor,
- Plastic paint for pyramidal matched hybrid absorbers
- Chamber testing:
     * Shielding effectiveness, according to EN 50147-1, from 10 kHz to 18 GHz
     * Site Attenuation, according to CISPR 16-1-4, from 30 MHz to 1 GHz
     * Site VSWR, according to CISPR 16-1-4, from 1 to 18 GHz
     * Field Uniformity, according to IEC 61000-4-3, from 26 MHz to 18 GHz
 
 EMI PERFORMANCES  
SIEPEL HERMES 10 chamber is designed to perform full compliance radiated EMI testing according to the following standards: CISPR 11, CISPR 16, CISPR 22, CISPR 32, EN 50147-2, EN 55011, EN 55016, EN 55022, ANSI C63.4 from 30 MHz to 18 GHz.

As a basic design, we propose a test volume with following main features:
- Diameter: 3 meters / Height: 2 meters
- NSA (30 MHz – 1 GHz) max deviation from theoretical value: better than ± 4 dB
- Site VSWR (1-18 GHz): ≤ 6 dB
- For bigger EUTs, we can propose larger test volumes.

Please contact us: we can design the chamber that fits your particular needs!

Свернуть Развернуть
Основные возможности и технические характеристики
   STANDARDS
Radiated EMI testing: Fully compliant with the following standards, from 30 MHz to 18 GHz:
 - CISPR 11,
 - CISPR 16-1-4,
 - CISPR 22,
 - CISPR 32,
 - EN 50147-2,
 - EN 55011,
 - EN 55022,
 - ANSI C63.4,

 Radiated EMS testing: Fully compliant with:
- IEC 61000-4-3 from 26 MHz to 18 GHz

 Radio standards:
- All ETSI standards referring to CISPR 16 and IEC 61000-4-3
 
 BASIC CONFIGURATION  
Shielded room 18030 x 12160 x 8440 mm (external shield to shield dimensions)
- Structural steel frame and stiffeners,
- 1 manual, single leaf, “knife edge” shielded door, with clear opening 1500 x 2130 mm, including maintenance kit,
- Raised floor, with metallic ground plane and 2 access hatches,
- 4 honeycomb air vents 300 x 600 mm, fitted with flanges,
- 2 feedthrough panels 1220 x 200 mm fitted with 2 N connectors and 2 feedthrough waveguides Ø 20 mm for fibre optics,
- 1 power line filter 2 lines (single phase + neutral) – 32 A – 230 V – 50 Hz,
- Electrical package: 1 main switchboard with appropriate protection, electric distribution and lighting,
- Absorbers lining
     * Ferrite tiles lining of the four side walls and ceiling,
     * Pyramidal matched hybrid absorbers HY45 (aqueous blue paint) lining of the most critical areas of the two side walls, back wall and ceiling (numerically simulated optimized design).
 OPTIONS  
- Other doors dimensions & types (single, double, sliding)
- Electric or pneumatic assistance for door latching
- Shielded control room, shielded amplifier room
- Turntable (any diameter, any load)
- Automatic antenna mast (1 to 4 m height scan)
- GPIB interface controller (for positioners remote control)
- Additional power filters, data filters and special connectors
- Video monitoring CCTV system, Intercom/Audio monitoring system
- Vinyl tiles on the floor,
- Plastic paint for pyramidal matched hybrid absorbers
- Chamber testing:
     * Shielding effectiveness, according to EN 50147-1, from 10 kHz to 18 GHz
     * Site Attenuation, according to CISPR 16-1-4, from 30 MHz to 1 GHz
     * Site VSWR, according to CISPR 16-1-4, from 1 to 18 GHz
     * Field Uniformity, according to IEC 61000-4-3, from 26 MHz to 18 GHz
 
 EMI PERFORMANCES  
SIEPEL HERMES 10 chamber is designed to perform full compliance radiated EMI testing according to the following standards: CISPR 11, CISPR 16, CISPR 22, CISPR 32, EN 50147-2, EN 55011, EN 55016, EN 55022, ANSI C63.4 from 30 MHz to 18 GHz.

As a basic design, we propose a test volume with following main features:
- Diameter: 3 meters / Height: 2 meters
- NSA (30 MHz – 1 GHz) max deviation from theoretical value: better than ± 4 dB
- Site VSWR (1-18 GHz): ≤ 6 dB
- For bigger EUTs, we can propose larger test volumes.

Please contact us: we can design the chamber that fits your particular needs!

Комплектацию Вы можете узнать:
По тел.: +7 (495) 105 96 88 или
Написать нам письмо: info@micro-electronics.ru
Комплектацию Вы можете узнать:
По тел.: +7 (495) 105 96 88 или
Написать нам письмо: info@micro-electronics.ru
Свернуть Развернуть
Сведения о реестре СИ

Номер в Госреестре

Наименование СИ

Обозначение типа СИ

Изготовитель

Срок свидетельства или заводской номер

Не в реестре
Свернуть Развернуть
Сведения о реестре СИ

Номер в Госреестре

Наименование СИ

Обозначение типа СИ

Изготовитель

Срок свидетельства или заводской номер

Не в реестре
Характеристики
Загрузить технические характеристики

*
 EMI PERFORMANCES
 SIEPEL HERMES 10 chamber is designed to perform full compliance radiated EMI testing according to the following standards: CISPR 11, CISPR 16, CISPR 22, CISPR 32, EN 50147-2, EN 55011, EN 55016, EN 55022, ANSI C63.4 from 30 MHz to 18 GHz.
As a basic design, we propose a test volume with following main features:

- Diameter: 3 meters / Height: 2 meters
- NSA (30 MHz – 1 GHz) max deviation from theoretical value: better than ± 4 dB
- Site VSWR (1-18 GHz): ≤ 6 dB
- For bigger EUTs, we can propose larger test volumes.

Please contact us: we can design the chamber that fits your particular needs!

HERMES 10
EMI (Electromagnetic Interference)

Frequency range From 30 MHz to 1 GHz From 1 GHz to 18 GHz
Applicable standards EN 50147-2, ANSI C63.4, EN 55011, EN 55016, EN 55022, CISPR 16, CISPR 32 … CISPR 16
Height of Tx antenna Horizontal: 1 m, 3 m Horizontal : 1 m, 3 m
Vertical: 1 m, 2,5 m Vertical : 1 m, 3 m
Height of Rx antenna Scan from 1 to 4 m 1 m and 3 m
Measurement distance 10 m 3 m
Polarization Horizontal and vertical Horizontal and vertical
Measured position of Tx antenna Tx antenna to be located in four positions (centre, front, left and right) Tx antenna to be located in four positions (centre, front, left and right)
Working volume Diameter : 3 m / Height : 3 m Diameter: 3 m / Height: 3 m
Remarks Test with metallic ground plane 44 APM 30 Absorbers on the floor
Max. deviation ±4 dB ≤ 6 dB
EMS PERFORMANCES
SIEPEL HERMES 10 is fully compliant to perform radiated EMS testing according to the EN/IEC 61000-4-3, in the extended frequency range from 26 MHz to 18 GHz.
Immunity tests are performed with 16 electromagnetic pyramidal absorbers APM66 on the floor, between field generation antenna and uniform field plane.
Those absorbers can be very easily removed and stored outside the chamber when they are not necessary.

HERMES 10
EMS (Electromagnetic Susceptibility)

Applicable standards EN/IEC 61000-4-3
Frequency range From 26 MHz to 18 GHz
Measurement distance 3 m
Field Generation Antenna Biconical/ Log Per or broadband antenna
Rx antenna Broadband isotropic probe, 16 positions, measured area of 1,5 x 1,5 m, located 0,8 m – 2,3 m over the floor
Polarization Horizontal and vertical
Remark Test with 16 APM66 absorbers on the floor
Field Uniformity +0 to +6 dB for 75% of the 16 measured points
Модели и опции
Товар
Модели и Опции
Описание
Цена Заказать
Модели
HERMES 10
Siepel HERMES 10 26 МГц - 18 ГГц t = 10 м, объем тихой зоны 4х3 м, ДхШхВ 19200х13550х9000 мм
По запросу
- шт +
Библиотека

Основные сведения о продукте

Посмотреть более подробную информацию о возможностях этого продукта.
Отзывы
Добавить отзыв
Оцените товар:
Ваше имя
Достоинства

Недостатки

Комментарий

Символы на картинке


Тут еще никто ничего не писал, стань первым!
Список просмотренных товаров пуст
Список избранного пуст
Ваша корзина пуста
Помощь
Ошибка на сайте? Выдели её и нажми Ctrl+Enter