Компактные высоковольтные элекронные нагрузки DC до 20 кВт

PLZ-5WH2 Series
Для увеличения картинки наведите мышкой
PLZ-5WH2 SeriesPLZ-5WH2 SeriesPLZ-5WH2 SeriesPLZ-5WH2 SeriesPLZ-5WH2 SeriesPLZ-5WH2 SeriesPLZ-5WH2 SeriesPLZ-5WH2 Series
PLZ-5WH2 SeriesPLZ-5WH2 SeriesPLZ-5WH2 SeriesPLZ-5WH2 SeriesPLZ-5WH2 SeriesPLZ-5WH2 SeriesPLZ-5WH2 SeriesPLZ-5WH2 Series

Наличие: По запросу

По запросу
По запросу
По запросу

Электронные нагрузки постоянного тока PLZ-5WH2 Series Подробнее




Японская компания Kikusui Electronics Corporation - производитель электронных измерительных приборов и оборудования для электропитания с 1951 года.

В 1983 году группа Kikusui основала фабрику Fuji Katsuyama Factory (FKF) в качестве внутреннего производственного центра. В течение 1990-х… подробнее





Обзор
Свернуть Развернуть
Основные возможности и технические характеристики

Outline

The PLZ-5WH2 high power DC electronic load series is where durable, reliable ingenuity meets multifunctional and high power design. Providing 5 variety of power range line-ups, from 1 kW bench top style model to high power model that can sink up to 20 kW of power in a single unit. Possible to easily selects applicable power range depends on the load. Load simulation can be achieved faster than ever before thanks to the reliable, high speed design of the PLZ-5WH current control circuits. Accurate current measures can be made with extremely high setting resolution. A color LCD display allows for highly visible, user-friendly front panel operation. RS232C, USB, and LAN digital interfaces are included as standard for simple integration into any system.

 Features

  • Operation Modes
    The following five operation modes are available on the PLZ-5WH2. In addition, available to set in operation modes other than CV mode, the “UVPL*” setting keep the voltage less than UVP setting by controlling the current and the “UVPT” setting loads off by applying a current to reach the target setting voltage.
    Constant current (CC) mode When a current value is specified, the current is kept at that value even when the voltage changes.
    Constant resistance (CR) mode When a conductance value is specified, the product sinks current proportional to the voltage variation by using the value as a proportionality constant.
    Constant voltage (CV) mode When a voltage value is specified, the product runs the current so that the voltage is kept at that value.
    Constant power (CP) mode When a power value is specified, the product runs the current so that the power is kept at that value.
    Arbitrary I-V charac-teristics (ARB) mode The desired load characteristics can be set by specifying multiple arbitrary voltage values and current values as I-V characteristics.

    * "UVPL" is the "+CV mode" in PLZ-5W series


  • Wide Ranging Operation Voltage up to 1000 V
    Operating voltage ranges from 10 V to 1000 V.
    Minimum operating voltage required to sink current is 1.5 V.
  • Maximum Slew Rate of 20 A/μs
    The PLZ-5WH2 series boasts a 20 μs rise time*, easily satisfying the critical needs of power supply evaluation tests demanding a fast transient response.
    *When using the PLZ20005WH2
  • Parallel Operation
    Up to 100 kW with parallel operation (Max. 5 units)
    Parallel operation (max. 5 units) is available on all models by simply connecting an optional parallel operation cable. This feature is available even among different models for a wide range of high power. (up to 100 kW / 2000 A)
    *A parallel cable needs to have each unit connection. 12 kW and 20 kW models are included in accessory. 1 kW, 2 kW and 4 kW models are option.

    Parallel connection with PLZ-5WH series*
    Must be PLZ-5WH as a Master and update the firmware to newest version.
    *When parallel operation between 5WH and 5WH2, only same capacity model is available.

    Maximum current and power during parallel operation using the same model

    Model Parallel operation number Maximum current Maximum power
    PLZ20005WH2 2 800 A 40 kW
    3 1200 A 60 kW
    4 1600 A 80 kW
    5 2000 A 100 kW
  • Communication Interface
    LAN(LXI), USB and RS232C standard digital interface. *GPIB Option
  • Arbitrary I-V Characteristics (ARB) Mode
    In ARB mode, arbitrary I-V characteristics can be set by registering multiple I-V characteristic points (pairs of voltage and current values). Three up to 100 points can be registered, and the space between two points is linearly interpolated. The minimum voltage (0.00 V) and current (0.00 A) and the maximum voltage (1010.00 V) are fixed.
  • Other Feartures
    • Load On/Off
    • Cutoff Function
    • Changing the Response Speed
    • Soft Start
    • Data Logging Function
    • Integrated Data Function
    • Saving Measurement Data
    • Pulse Function
    • Sine Function
    • Sequence Function
    • Alarm Function
    • ABC Preset Memories
    • Setup Memory
    • External Control
    • Current and Voltage Monitor
    • USB Keyboard
    • Synchronized Operation
    • Remote Sensing

Свернуть Развернуть
Основные возможности и технические характеристики

Outline

The PLZ-5WH2 high power DC electronic load series is where durable, reliable ingenuity meets multifunctional and high power design. Providing 5 variety of power range line-ups, from 1 kW bench top style model to high power model that can sink up to 20 kW of power in a single unit. Possible to easily selects applicable power range depends on the load. Load simulation can be achieved faster than ever before thanks to the reliable, high speed design of the PLZ-5WH current control circuits. Accurate current measures can be made with extremely high setting resolution. A color LCD display allows for highly visible, user-friendly front panel operation. RS232C, USB, and LAN digital interfaces are included as standard for simple integration into any system.

 Features

  • Operation Modes
    The following five operation modes are available on the PLZ-5WH2. In addition, available to set in operation modes other than CV mode, the “UVPL*” setting keep the voltage less than UVP setting by controlling the current and the “UVPT” setting loads off by applying a current to reach the target setting voltage.
    Constant current (CC) mode When a current value is specified, the current is kept at that value even when the voltage changes.
    Constant resistance (CR) mode When a conductance value is specified, the product sinks current proportional to the voltage variation by using the value as a proportionality constant.
    Constant voltage (CV) mode When a voltage value is specified, the product runs the current so that the voltage is kept at that value.
    Constant power (CP) mode When a power value is specified, the product runs the current so that the power is kept at that value.
    Arbitrary I-V charac-teristics (ARB) mode The desired load characteristics can be set by specifying multiple arbitrary voltage values and current values as I-V characteristics.

    * "UVPL" is the "+CV mode" in PLZ-5W series


  • Wide Ranging Operation Voltage up to 1000 V
    Operating voltage ranges from 10 V to 1000 V.
    Minimum operating voltage required to sink current is 1.5 V.
  • Maximum Slew Rate of 20 A/μs
    The PLZ-5WH2 series boasts a 20 μs rise time*, easily satisfying the critical needs of power supply evaluation tests demanding a fast transient response.
    *When using the PLZ20005WH2
  • Parallel Operation
    Up to 100 kW with parallel operation (Max. 5 units)
    Parallel operation (max. 5 units) is available on all models by simply connecting an optional parallel operation cable. This feature is available even among different models for a wide range of high power. (up to 100 kW / 2000 A)
    *A parallel cable needs to have each unit connection. 12 kW and 20 kW models are included in accessory. 1 kW, 2 kW and 4 kW models are option.

    Parallel connection with PLZ-5WH series*
    Must be PLZ-5WH as a Master and update the firmware to newest version.
    *When parallel operation between 5WH and 5WH2, only same capacity model is available.

    Maximum current and power during parallel operation using the same model

    Model Parallel operation number Maximum current Maximum power
    PLZ20005WH2 2 800 A 40 kW
    3 1200 A 60 kW
    4 1600 A 80 kW
    5 2000 A 100 kW
  • Communication Interface
    LAN(LXI), USB and RS232C standard digital interface. *GPIB Option
  • Arbitrary I-V Characteristics (ARB) Mode
    In ARB mode, arbitrary I-V characteristics can be set by registering multiple I-V characteristic points (pairs of voltage and current values). Three up to 100 points can be registered, and the space between two points is linearly interpolated. The minimum voltage (0.00 V) and current (0.00 A) and the maximum voltage (1010.00 V) are fixed.
  • Other Feartures
    • Load On/Off
    • Cutoff Function
    • Changing the Response Speed
    • Soft Start
    • Data Logging Function
    • Integrated Data Function
    • Saving Measurement Data
    • Pulse Function
    • Sine Function
    • Sequence Function
    • Alarm Function
    • ABC Preset Memories
    • Setup Memory
    • External Control
    • Current and Voltage Monitor
    • USB Keyboard
    • Synchronized Operation
    • Remote Sensing

Свернуть Развернуть
Сведения о реестре СИ
Номер в госреестре
Не в реестре
Наименование СИ

Обозначение типа СИ

Изготовитель

Срок свидетельства или заводской номер

Свернуть Развернуть
Сведения о реестре СИ
Номер в госреестре
Не в реестре
Наименование СИ

Обозначение типа СИ

Изготовитель

Срок свидетельства или заводской номер

Характеристики
Загрузить технические характеристики

Model Specification
PLZ1005WH2 DC Electronic Load: Max. 1 kW, 10 to 1000 V, 20 A. Equipped with four modes (Constant Current / Constant Resistance / Constant Voltage / Constant Power) plus Arbitrary IV Characteristics (ARB) mode to reproduce nonlinear load characteristics.Sequence control functionality enables actual-load simulations. Parallel operation enables scalability. Comes with LAN, RS232C and USB communication interfaces installed as a standard feature. *GPIB Option
PLZ2005WH2 DC Electronic Load: Max. 2 kW, 10 to 1000 V, 40 A. Equipped with four modes (Constant Current / Constant Resistance / Constant Voltage / Constant Power) plus Arbitrary IV Characteristics (ARB) mode to reproduce nonlinear load characteristics.Sequence control functionality enables actual-load simulations. Parallel operation enables scalability. Comes with LAN, RS232C and USB communication interfaces installed as a standard feature. *GPIB Option
PLZ4005WH2 DC Electronic Load: Max. 4 kW, 10 to 1000 V, 80 A. Equipped with four modes (Constant Current / Constant Resistance / Constant Voltage / Constant Power) plus Arbitrary IV Characteristics (ARB) mode to reproduce nonlinear load characteristics.Sequence control functionality enables actual-load simulations. Parallel operation enables scalability. Comes with LAN, RS232C and USB communication interfaces installed as a standard feature. *GPIB Option
PLZ12005WH2 DC Electronic Load: Max. 12 kW, 10 to 1000 V, 240 A. Equipped with four modes (Constant Current / Constant Resistance / Constant Voltage / Constant Power) plus Arbitrary IV Characteristics (ARB) mode to reproduce nonlinear load characteristics.Sequence control functionality enables actual-load simulations. Parallel operation enables scalability. Comes with LAN, RS232C and USB communication interfaces installed as a standard feature. *GPIB Option
PLZ20005WH2 DC Electronic Load: Max. 20 kW, 10 to 1000 V, 400 A. Equipped with four modes (Constant Current / Constant Resistance / Constant Voltage / Constant Power) plus Arbitrary IV Characteristics (ARB) mode to reproduce nonlinear load characteristics.Sequence control functionality enables actual-load simulations. Parallel operation enables scalability. Comes with LAN, RS232C and USB communication interfaces installed as a standard feature. *GPIB Option

Модели и опции
Товар
Модели и Опции
Описание
Цена Заказать
Модели
PLZ1005WH2
Электронная нагрузка DC 1 кВт, 10 - 1000 V, 20 А
По запросу
- шт +
PLZ2005WH2
Электронная нагрузка DC 2 кВт, 10 - 1000 V, 40 А
По запросу
- шт +
PLZ4005WH2
Электронная нагрузка DC 4 кВт, 10 - 1000 V, 80 А
По запросу
- шт +
PLZ12005WH2
Электронная нагрузка DC 12 кВт, 10 - 1000 V, 240 А
По запросу
- шт +
PLZ20005WH2
Электронная нагрузка DC 20 кВт, 10 - 1000 V, 400 А
По запросу
- шт +
Опции
KRB3-TOS
Bracket (Inch size) for TOS9200, TOS9201, TOS8870A, PAM(2kW type), PCR1000M(MA), PLZ1205W, PLZ-4W/4WH, PWR, PAT, PBZ, PCR1000WE, PCR2000WE, PCR3000WE2, TOS9300, TOS9301, TOS9302, TOS9303, TOS9303LC
По запросу
- шт +
KRB150-TOS
Bracket (Metric size) for TOS9200, TOS9201, TOS8870A, PAM(2kW type), PCR1000M(MA), PLZ1205W, PLZ-4W/4WH, PWR, PAT, PBZ, PCR1000WE, PCR2000WE, PCR3000WE2, TOS9300, TOS9301, TOS9302, TOS9303, TOS9303LC
По запросу
- шт +
KRB9
Bracket (Inch size) for PCR2000LE, PLZ12005WH, PCR12000WE2®
По запросу
- шт +
KRB400-PCR-LE
Bracket (Metric size) for PCR2000LE,PLZ12005WH, PCR12000WE2®
По запросу
- шт +
KRB13
Bracket (Inch size) for PLZ20005WH
По запросу
- шт +
KRB600
Bracket (Metric size) for PLZ20005WH
По запросу
- шт +
PIA5100
GPIB-преобразователь
По запросу
- шт +
PC01-PLZ-5W
Кабель для параллельной работы серии PLZ-5W
По запросу
- шт +
PC02-PLZ-5W
Сигнальный кабель для параллельной работы серии PLZ-5W
По запросу
- шт +
Wavy for PLZ-5WH2 (SD033-PLZ-5WH2)
ПО создание/управление тестовыми последовательностями
По запросу
- шт +
Библиотека

Основные сведения о продукте

Посмотреть более подробную информацию о возможностях этого продукта.

Технические характеристики

Отзывы
Добавить отзыв
Оцените товар:
Ваше имя
Достоинства

Недостатки

Комментарий

Символы на картинке


NOBRIGA91
15 октября 2021
Список просмотренных товаров пуст
Список избранного пуст
Ваша корзина пуста
Помощь
Ошибка на сайте? Выдели её и нажми Ctrl+Enter