Наличие: По запросуПо запросу По запросу По запросу
Компания Schwarzbeck Mess-Elektronik - немецкая фирма, разрабатывающая и производящая продукцию для измерений и испытаний на ЭМС (электромагнитную совместимость). Компания была основана в 1953 году в Германии Гюнтером Шварцбеком, который во всей Европе считается основоположником по созданию приборов для ЭМС-измерений. Головной офис Schwarzbeck Mess-Elektronik расположен в городе Шёнау-им-Шварцвальд.
Компания Schwarzbeck Mess-Elektronik выпускает широкий ряд измерительных антенн с сопутствующими аксессуарами, эквиваленты сети, системы… подробнее
Description:
Low Noise Low Power Wideband Amplifier for increasing sensitivity at field- strength-measurements and for general attenuation measurements up to 28 GHz (useable frequency range).
Low Noise Low Power Wideband Amplifier for increasing sensitivity at field- strength-measurements and for general attenuation measurements up to 26.5 GHz (nominal frequency range). A power supply with 12 V / 300 mA DC (e.g. optional AC/DC adaptor, laboratory power supply, rechargeable battery) is required for operation.In- and Output of the Broadband Amplifier are sensitive to Electrostatic Discharge. Therefore, some precaution (discharging coaxial cables and persons) is required before touching the amplifier!
The amplifier Input comes with SMA-female connectors. A coaxial microwave cable of 0.5 m length is supplied to connect the Antenna with the Amplifier. The cable is equipped with SMA-male connectors. The amplifier is equipped with a female 3/8" camera thread to be connected to a mast, e.g. to AM 9144. The antenna itself is mounted with another 3/8" screw at the amplifier base. The polarisation swivel can easily be achieved within seconds by a further screw in 45° steps using fixing bolts for indexing.
It is very important to avoid bending and torsion of the microwave cable, other-wise persistent damage may be a result. Therefore, we recommend to mount the antenna in a way that the antenna connector points into the opposite direction as the RF-Input of the amplifier. This allows a smooth routing the microwave cable with a wide bending radius.
Typical mounting examples together with Horn Antenna BBHA 9170 and Mast AM 9144 at horizontal, 45° and vertical polarisation.
Description:
Low Noise Low Power Wideband Amplifier for increasing sensitivity at field- strength-measurements and for general attenuation measurements up to 28 GHz (useable frequency range).
Low Noise Low Power Wideband Amplifier for increasing sensitivity at field- strength-measurements and for general attenuation measurements up to 26.5 GHz (nominal frequency range). A power supply with 12 V / 300 mA DC (e.g. optional AC/DC adaptor, laboratory power supply, rechargeable battery) is required for operation.In- and Output of the Broadband Amplifier are sensitive to Electrostatic Discharge. Therefore, some precaution (discharging coaxial cables and persons) is required before touching the amplifier!
The amplifier Input comes with SMA-female connectors. A coaxial microwave cable of 0.5 m length is supplied to connect the Antenna with the Amplifier. The cable is equipped with SMA-male connectors. The amplifier is equipped with a female 3/8" camera thread to be connected to a mast, e.g. to AM 9144. The antenna itself is mounted with another 3/8" screw at the amplifier base. The polarisation swivel can easily be achieved within seconds by a further screw in 45° steps using fixing bolts for indexing.
It is very important to avoid bending and torsion of the microwave cable, other-wise persistent damage may be a result. Therefore, we recommend to mount the antenna in a way that the antenna connector points into the opposite direction as the RF-Input of the amplifier. This allows a smooth routing the microwave cable with a wide bending radius.
Typical mounting examples together with Horn Antenna BBHA 9170 and Mast AM 9144 at horizontal, 45° and vertical polarisation.
- Узнайте по тел.: +7 (495) 105 96 88
- Напишите нам письмо: info@micro-electronics.ru
- Узнайте по тел.: +7 (495) 105 96 88
- Напишите нам письмо: info@micro-electronics.ru
| Frequency range (nominel): | 18 - 26.5 GHz |
| Useable frequency range: | 12 - 28 GHz |
| Gain: | typ. 33 dB +/-2 dB |
| Gain min.: | 30 dB |
| SWR typ.: | <2 |
| Max. input power: | -20 dBm (87 dBµV) |
| 1 dB Compression:(at output) | >+17 dBm (124 dBµV) |
| Noise Figure: | 3.5 dB |
| Connectors: | 50 Ω SMA |
| Supply Voltage: | 12 V - 15 V DC |
| Current Consumption: | 250-300 mA |
| Power Supply via female Banana sockets: | 4 mm |
| Dimensions: | 210 x 100 x 60 mm |
| Weight: | 150 g |
Товар |
|
|
|
Модели и Опции |
Описание |
Цена | Заказать |
0
| Модели |
|
BBV 9719
|
Микроволновый малошумящий усилитель 18 ГГц - 26,5 ГГц
|
По запросу |
1
| Опции |
|
Akku
|
АКБ для BBV 9718 или 9719.
|
По запросу | ||
|
ALCS 2-24A
|
Зарядной устройство ALCS 2-24A для АКБ
|
По запросу | ||
|
PS
|
Малошумящий источник питания для BBV 9718 или 9719.
|
По запросу |
