Генератор сигналов, 120 МГц, 2 канала

33600A
Для увеличения картинки наведите мышкой
33600A33600A33600A33600A33600A33600A33600A33600A
33600A33600A33600A33600A33600A33600A33600A33600A

Наличие: По запросу

По запросу
По запросу
По запросу

Генераторы сигналов 33600A Подробнее




Американская компания Keysight Technologies начала свою историю в 1930-х годах прошлого века. Сегодня – это лидер в производстве измерительного оборудования и САПР (систем автоматизированного проектирования). Keysight Technologies предлагает интегрированные решения, объединяющие измерения, экстракцию параметров и верификацию разработок.

Компания Keysight Technologies производит осциллографы, анализаторы, измерители, генераторы, источники питания, а также… подробнее





Обзор
Свернуть Развернуть
Основные возможности и технические характеристики
Generate Trueform arbitrary waveforms with less jitter, more idelity and greater resolution


33600A Series waveform generators with exclusive Trueform

signal generation technology offer more capability, idelity

and lexibility than previous generation Direct Digital Synthesis (DDS) generators. Use them to accelerate your development process from start to inish.

  • 1 GSa/s sampling rate and up to 120 MHz bandwidth
  • Arbs with sequencing and up to 64 MSa memory
  • 1 ps jitter, 200x better than DDS generators
  • 5x lower harmonic distortion than DDS
  • Compatible with Keysight Technologies, Inc. BenchVue software

Over the past two decades, DDS has been the waveform generation technology of choice in function generators and economical arbitrary waveform generators. DDS enables waveform generators with great frequency resolution, convenient custom waveforms, and a low price.

As with any technology, DDS has its limitations. Engineers with exacting requirements have had to either work around the compromised performance or spend up to 5 times more for a high- end, point-per-clock waveform generator.

Keysight Technologies, Inc. Trueform technology offers an alternative that blends the best of DDS and point-per-clock architectures, giving you the beneits of both without the limitations of either. Trueform technology uses an exclusive digital sampling technique that delivers unmatched performance at the same low price you are accustomed to with DDS.

The table below highlights the revolutionary capabilities of Trueform technology.


Свернуть Развернуть
Основные возможности и технические характеристики
Generate Trueform arbitrary waveforms with less jitter, more idelity and greater resolution


33600A Series waveform generators with exclusive Trueform

signal generation technology offer more capability, idelity

and lexibility than previous generation Direct Digital Synthesis (DDS) generators. Use them to accelerate your development process from start to inish.

  • 1 GSa/s sampling rate and up to 120 MHz bandwidth
  • Arbs with sequencing and up to 64 MSa memory
  • 1 ps jitter, 200x better than DDS generators
  • 5x lower harmonic distortion than DDS
  • Compatible with Keysight Technologies, Inc. BenchVue software

Over the past two decades, DDS has been the waveform generation technology of choice in function generators and economical arbitrary waveform generators. DDS enables waveform generators with great frequency resolution, convenient custom waveforms, and a low price.

As with any technology, DDS has its limitations. Engineers with exacting requirements have had to either work around the compromised performance or spend up to 5 times more for a high- end, point-per-clock waveform generator.

Keysight Technologies, Inc. Trueform technology offers an alternative that blends the best of DDS and point-per-clock architectures, giving you the beneits of both without the limitations of either. Trueform technology uses an exclusive digital sampling technique that delivers unmatched performance at the same low price you are accustomed to with DDS.

The table below highlights the revolutionary capabilities of Trueform technology.


All models come with a rich set of built-in
  • standard features
  • including LAN
  • USB and optional GPIB interface
  • 4 MSample of memory, an external timebase input
  • Basic waveform generation software
  • All models come with a rich set of built-in
  • standard features
  • including LAN
  • USB and optional GPIB interface
  • 4 MSample of memory, an external timebase input
  • Basic waveform generation software
  • Свернуть Развернуть
    Сведения о реестре СИ

    Номер в Госреестре

    Наименование СИ

    Обозначение типа СИ

    Изготовитель

    Срок свидетельства или заводской номер

    Не в реестре
    Свернуть Развернуть
    Сведения о реестре СИ

    Номер в Госреестре

    Наименование СИ

    Обозначение типа СИ

    Изготовитель

    Срок свидетельства или заводской номер

    Не в реестре
    • 33600A Keysight Trueform Waveform Generators, 80 MHz and 120 MHz
    • Burstmode 33600A
    • Installing optional GPIB into 34460A, 34461A DMM or 33600A Waveform Generator
    • Utilisation du Keysight 33600A dans Logixia
    Характеристики
    Загрузить технические характеристики

    Specifications
    Unless otherwise stated, all speciications apply with a 50-Ω resistive load and automatic amplitude range selection enabled.
    Instrument characteristics
    Models & options 
    Model number 33611A 33612A 33621A 33622A
    Maximum frequency 80 MHz 80 MHz 120 MHz 120 MHz
    Number of channels 1 2 1 2
    Option MEM Increases arbitrary waveform memory from 4 MSa/channel to 64 MSa/channel
    Option IQP IQ player (33612A/22A only)
    Option SEC Enables NISPOM and ile security
    Option OCX Oven-controlled frequency reference for improved stability, jitter, and phase noise
    Waveforms                                                                                                                                                                                                                          
    Standard Sine, Square, Ramp, Pulse, Triangle, Gaussian Noise, PRBS (Pseudorandom Binary Sequence), DC
    Built-in arbitrary Cardiac, Exponential Fall, Exponential Rise, Gaussian Pulse, Haversine, Lorentz, D-Lorentz, Negative Ramp, Sinc
    User-deined arbitrary Up to 4 MSa (64 MSa with Option MEM) with multi-segment sequencing
    Operating modes & modulation types                                                                                                                                                                                  
    Operating modes Continuous, Modulate, Frequency Sweep, Counted Burst, Gated Burst
    Modulation types AM, FM, PM, FSK, BPSK, PWM, Sum (carrier + modulation)
    Waveform characteristics (all 33600A models)
    Sine
    Frequency ranges
    VOUT ≤ 10 Vpp 1 µHz to 60 MHz, 1-µHz resolution
    VOUT ≤ 8 Vpp 1 µHz to 80 MHz, 1-µHz resolution
    VOUT ≤ 4 Vpp 1 µHz to 120 MHz, 1-µHz resolution 1
    Amplitude latness (rel. to 1 kHz) (spec) 2, 3 VOUT  = 1 Vpp VOUT  > 1 Vpp
    fOUT < 10 MHz ± 0.10 dB ± 0.10 dB
    fOUT = 10 MHz to 60 MHz ± 0.20 dB ± 0.25 dB
    fOUT = 60 MHz to 80 MHz ± 0.30 dB ± 0.40 dB
    fOUT  = 80 MHz to 120 MHz 1 ± 0.40 dB ± 0.50 dB
    Harmonic distortion (typ) 2 VOUT  = 1 Vpp VOUT  = 4 Vpp VOUT  = 8 Vpp VOUT=10 Vpp
    fOUT < 1 MHz −70 dBc −69 dBc −68 dBc −67 dBc
    fOUT < 1 MHz to 10 MHz −61 dBc −58 dBc −54 dBc −51 dBc
    fOUT > 10 MHz −43 dBc −36 dBc −40 dBc −39 dBc
    THD (typ) 2 VOUT  = 1 Vpp VOUT  > 1 Vpp
    fOUT = 20 Hz to 20 kHz 0.03% 0.04%
    Non-harmonic spurious (VOUT ≥ 300 mVpp) (typ) 2, 4
    fOUT < 10 MHz −80 dBc
    fOUT = 10 MHz to 60 MHz −75 dBc
    fOUT > 60 MHz −70 dBc
    Phase noise (SSB) (meas) 5 fOUT  = 80 MHz fOUT  = 80 MHz, Opt OCX fOUT  = 120 MHz 1 fOUT= 120 MHz, Opt OCX 1
    100-Hz offset −105 dBc/Hz −114 dBc/Hz −101 dBc/Hz −110 dBc/Hz
    1-kHz offset −116 dBc/Hz −122 dBc/Hz −112 dBc/Hz −118 dBc/Hz
    10-kHz offset −122 dBc/Hz −125 dBc/Hz −118 dBc/Hz −121 dBc/Hz
    100-kHz offset −129 dBc/Hz −131 dBc/Hz −125 dBc/Hz −127 dBc/Hz
    Square & pulse
    Frequency ranges
    Vout≤10Vpp 1 μHz to 50 MHz, 1-pHz resolution
    Vout≤4pp 1 μHz to 100 MHz, 1-pHz resolution 1
    Rise & fall time (nom) Square Pulse
    Vout ≤ 4Vpp 2.9 ns 2.9 ns to 1 ms, independently variable, 100-ps resolution
    Vout ≤ 4Vpp 4.0 ns 3.3 ns to 1 ms, independently variable, 100-ps resolutio
    Overshoot (typ) Square Pulse, min. edge Pulse, 4-ns edge Pulse, > 6-ns edge
    Vout ≤ 4 Vpp < 4% < 4% < 2% < 2%
    Vout ≤  4Vpp < 4% < 7% < 4% < 2%
    Duty cycle 6 0.01% to 99.99%, 0.01% resolution
    Pulse width
    Vout≤4pp 5 ns minimum (high or low), 1-ps resolution
    Vout≤4pp 8 ns minimum (high or low), 1-ps resolution
    Jitter (rms) (meas) 7 Standard Opt OCX
    10-Hz to 40-MHz band 1 ps 0.5 ps
    Ramp & triangle
    Frequency range 1 pHz to 800 kHz, 1-pHz resolution
    Ramp symmetry 0% to 100%, 0.1% resolution, (0% is negative ramp, 100% is positive ramp, 50% is triangle)
    Nonlinearity (typ) < 0.05% from 5% to 95% of the signal amplitude
    Gaussian noise
    Variable bandwidth (nom)
    Vout≤10Vpp 1 mHz to 60 MHz
    Vout≤8Vpp 1 mHz to 80 MHz
    Vout≤4Vpp 1 mHz to 120 MHz 1
    Crest factor (nom) 4,6
    Repetition period  Pseudorandom binary sequence (PRBS)  Bit rate > 100 years
    Vout ≤  10 Vpp 1 mbps to 100 Mbps, 1-mbps resolution
    Vout ≤  4 Vpp 1 mbps to 200 Mbps, 1-mbps resolution 1
    Sequence length 2m-1, m = 3 to 32
    Rise & fall time (nom)
    Vout ≤  4 Vpp 2.9 ns to 1 ms, independently variable, 100-ps resolution
    Vout  > 4 Vpp 3.3 ns to 1 ms, independently variable, 100-ps resolution
    Arbitrary waveforms
    Waveform length 32 Sa to 4 MSa per channel (64 MSa with Option MEM) in increments of 1 Sa
    Sample rate (FS)
    33611A/12A 1 pSa/s to 660 MSa/s, 1-pSa/s resolution 8
    33621A/12A 1 pSa/s to 1 GSa/s , 1-pSa/s resolution 8
    Voltage resolution 14 bits
    Waveform ilters “Normal” (highest bandwidth, ~5% preshoot and overshoot), 
    “Step” (lower bandwidth, ~0% preshoot or overshoot), or
    “Off” (transitions from point to point occur as quickly as possible)
    Frequency and time characteristics Filter = “Normal” Filter = “Step” Filter = “Off”
    Bandwidth (-3 dB)(nom) 0.27 x Fs (100 MHz max) 0.13 x Fs (100 MHz max) 100 MHz
    Rise & fall time (nom) 0.35/bandwidth (3.5 ns min) 0.35/bandwidth (3.5 ns min) 3.5 ns
    Jitter (rms) (meas) 8 < 2 ps < 1 ps < 10 ps
    Arbitrary waveform sequencing
    Operation Individual arbitrary waveforms (segments) can be combined into user-defined lists (sequences) to form longer, more complex waveforms. Each sequence step specifies whether to repeat the associated segment a certain number of times, to repeat it indefinitely, to repeat it until a Trigger event occurs, or to stop and wait for a Trigger event. Additionally, the behavior of the Sync output (Marker) can be specified in each step. To improve throughput, multiple sequences and segments can be pre-loaded into volatile memory.
    Segment length 32 Sa to 4 MSa per channel (64 MSa with Option MEM) in increments of 1 Sa
    Sequence length 1 to 512 steps
    Segment repeat count 1 to 106 or “Infinite”
    Waveform output characteristics
    General
    Connector Front-panel BNC, shell and pin isolated from chassis (±42 V maximum)
    Function On, Off, or Inverted
    Output impedance (nom) 50 Ω
    Isolation Connector shells for channel output(s), Sync, and Mod In are connected together but isolated from the instrument’s chassis. Maximum allowable voltage on isolated connector shell or pin is ±42 V relative to chassis.
    Overload protection Output turns off automatically when an overload is applied. Instrument will tolerate a short circuit to ground indefinitely.
    Amplitude
    Range 9 1 mVpp to 10 Vpp into 50 Ω, 4-digit resolution
    2 mVpp to 20 Vpp into open circuit, 4-digit resolution
    Units Vpp, Vrms, or dBm
    Accuracy (at 1 kHz) (spec) 3 ± (1% of setting in Vpp) ± (1 mVpp)
    Voltage limit function User-definable maximum and minimum voltage limits
    DC offset
    Range ± (5 VDC - Peak AC) into 50 Ω, 4-digit resolution ± (10 VDC - Peak AC) into open circuit, 4-digit resolution
    Accuracy (spec) 3 ± (1% of Offset setting) ± (0.25% of amplitude in Vpp) ± (2 mV)
    Frequency accuracy (spec)
    Standard frequency reference
    1 year, 18 to 28 °C ± (1 ppm of setting + 15 pHz)
    1 year, 0 to 55 °C ± (2 ppm of setting + 15 pHz)
    High-stability frequency reference (Option OCX)
    1 year, 0 to 55 °C ± (0.1 ppm of setting + 15 pHz)
    Modulation, burst, and sweep capability
    Carrier AM FM PM FSK BPSK PWM Sum Burst Sweep
    Sine & square
    Pulse
    Ramp & triangle
    Gaussian noise ■10
    PRBS
    Single arbitrary
    Sequenced arbitrary
    Modulating signals
    Carrier Sine Square Ramp Triangle Noise PRBS Arbitrary External
    Sine
    Square & pulse
    Ramp & triangle
    Gaussian noise
    PRBS
    Arbitrary
    Modulation, burst, and sweep characteristics
    Amplitude modulation (AM) 
    Source Internal or external (all models), or other channel (33612A/22A only)
    Type Full-Carrier or Double-Sideband Suppressed-Carrier (DSSC)
    Depth 11 0% to 120%, 0.01% resolution
    Frequency modulation (FM) 12
    Source Internal or external (all models), or other channel (33612A/22A only)
    Deviation 1 pHz to 40 MHz (33611A/12A) or 60 MHz (33621A/22A), 1-pHz resolution
    Phase modulation (PM)
    Source Internal or external (all models), or other channel (33612A/22A only)
    Deviation 0° to 360°, 0.1° resolution
    Frequency-shift key modulation (FSK) 12
    Source Internal timer or rear-panel connector
    Mark & space Any frequency within the carrier signal's range
    Rate < 1 MHz
    Binary phase-shift key modulation (BPSK)
    Source Internal timer or rear-panel connector
    Phase shift 0° to 360°, 0.1° resolution
    Rate < 1 MHz
    Pulse-width modulation (PWM)
    Source Internal or external (all models), or other channel (33612A/22A only)
    Deviation 6 0% to 100% of pulse width, 0.01% resolution
    Additive modulation (Sum)
    Source Internal or external (all models), or other channel (33612A/22A only)
    Ratio 11 0% to 100% of carrier amplitude, 0.01% resolution  
    Burst characteristics 10
    Type Counted or gated
    Counted burst operation Each trigger event causes the instrument to produce from 1 to 108 or an “infinite” number of waveform cycles.
    Gated burst operation Instrument produces waveforms while the trigger is in the “on” state. For Gaussian Noise, waveform generation stops immediately when the trigger is in the “off” state. All other waveforms stop at the completion of a cycle; more than one cycle might elapse before generation stops.
    Start/stop phase -360° to +360°, 0.1° resolution
    Trigger source Internal timer or rear-panel connector
    Marker Indicated by the trailing edge of the Sync pulse; adjustable to any cycle of the burst.
    Modulation, burst, and sweep characteristics, continued
    Sweep characteristics12
    Type Linear, Logarithmic, or List (up to 128 user-defined frequencies)
    Operation Linear and Logarithmic sweeps are characterized by a Sweep time (during which the frequency changes smoothly from  Start to Stop), a Hold time (during which the frequency stays at the Stop frequency), and a Return time (during which the frequency changes smoothly from Stop to Start). Returns are always linear.
    Direction Up (start < stop) or Down (start > stop)
    Sweep time
    Linear 1 ms to 3600 s, 1-ms resolution; 3601 s to 250,000 s, 1-s resolution
    Logarithmic 1 ms to 500 s, 1-ms resolution
    Hold time 0 to 3600 s, 1-ms resolution
    Return time 0 to 3600 s, 1-ms resolution
    Trigger source 14 Immediate (continuous), external (rear-panel connector), manual (front-panel button), bus, or Internal timer
    Marker Indicated by the trailing edge of the Sync pulse; adjustable to any frequency between Start and Stop for Linear and  Logarithmic types or any frequency in the list for List type.
    Internal timer for FSK, BPSK, burst, and sweep
    Range 1 μs to 4000 s, 4-ns resolution
    Two-channel characteristics (33612A/22A only)
    Standard
    Operating modes Independent, Coupled parameter(s), Combined (Ch 1 + Ch 2), Equal (Ch 1 = Ch 2), or Differential (Ch 1 = -Ch 2)
    Parameter coupling None, Frequency (ratio or difference) and/or Amplitude and DC offset
    Relative Phase 0° to 360°, 0.1° resolution
    Channel-to-channel skew (typ) < 100 ps (both channels configured identically)
    Crosstalk (typ) < -85 dB
    IQ Player (Option IQP)
    Operation This option enables a two-channel model with arbitrary waveform capability to function as a baseband IQ (quadrature modulation) source. Programmable impairments include amplitude imbalance, DC offset difference, and channel-to-channel time skew.
    Channel-to-channel amplitude imbalance 11 -30% to +30%, 0.001% resolution
    Channel-to-channel  DC offset difference ± (5 VDC - Peak AC), 0.1-mV resolution into 50 Ω ± (10 VDC - Peak AC), 0.2-resolution into open circuit
    Channel-to-channel  time skew -1 to +1 ns, 10-ps resolution
    Display views Voltage-vs-Time or Constellation (Ch 1-vs-Ch 2)
    Sync/marker output
    Connector Front-panel BNC, shell and pin isolated from chassis (± 42 V maximum)
    Functions Sync, Sweep Marker, Burst Marker, Arbitrary Waveform Marker, or Off
    Assignment Channel 1 or Channel 2
    Polarity Normal or Inverted
    Output level (nom) 0 to +1.5 V into 50 Ω; 0 to +3.0 V into high impedance
    Output impedance (nom) 50 Ω
    Minimum pulse width (nom) 5 ns
    Modulation input
    Connector Rear-panel BNC, shell and pin isolated from chassis (±42 V maximum)
    Assignment Channel 1, Channel 2, or both
    Voltage level (nom) ±1 V or ±5 V full scale, selectable
    Input Impedance (nom) 5 kΩ
    Bandwidth (-3 dB) (typ) 0 Hz to 100 kH
    External trigger/gate input/output
    General characteristics
    Connector Rear-panel BNC, chassis-referenced (functions as Input or Output)
    Assignment: Input Channel 1, Channel 2, or both
    Output Channel 1 or Channel 2
    Polarity Positive or Negative slope
    Maximum Rate 1 MHz
    Input characteristics
    Threshold voltage (nom) (Output Level setting)/2
    Impedance (nom) 10 kΩ, DC-coupled
    Minimum pulse width 100 ns
    Variable Trigger Delay 0 to 1000 s, 1-ns resolution
    Latency (typ) 15 < 140 ns
    Jitter (typ) < 320 ps, rms
    Output characteristics
    Output voltage (nom)
    Low level 0 V
    High level 0.9 V to 3.8 V into high impedance, 0.1-V resolution
    Impedance (nom) 50 Ω
    Duty cycle (nom) 50%
    Fan-out Up to four Keysight 33600A Series waveform generators
    External frequency reference input/output
    Input characteristics
    Connector Rear-panel BNC, shell and pin isolated from chassis and all other connectors (±42 V max.)
    Frequency range: Standard 10 MHz ± 20 Hz
    Option OCX 10 MHz ± 1 Hz
    Voltage 200 mVpp to 5 Vpp
    Impedance 1 kΩ ll 20 pF, AC-coupled
    Lock time (typ) < 2 s
    Output characteristics
    Connector Rear-panel BNC, chassis-referenced
    Frequency (nom) 10 MHz
    Level (nom) 0 dBm (632 mVpp) into 50 Ω
    Impedance (nom) 50 Ω
    Programming times
    Configuration changes (meas) LAN (socket) LAN (VXI-11) USB 2.0 GPIB
    Change function (meas) 29.2 ms 29.7 ms 29.4 ms 29.2 ms
    Change frequency (meas) 2.7 ms 3.3 ms 2.8 ms 2.7 ms
    Change amplitude (meas) 8.3 ms 9.0 ms 8.3 ms 8.3 ms
    Select Arb. waveform (16 k samples)(meas) 12.7 ms 13.9 ms 13.1 ms 12.6 ms
    Arbitrary waveform download to volatile
    4 K samples (binary transfer) (meas) 6.4 ms 13.2 ms 6.6 ms 52.3 ms
    1 M samples (binary transfer) (meas) 1.26 s 2.40 s 1.25 s 12.3 s
    Memory
    Arbitrary waveform
    Volatile 4 MSa/channel (64 MSa/channel with Option MEM). 512 sequence steps per channel
    Non-volatile 970 MB in file system (~485 MSa of arbitrary waveform records)
    Instrument state
    Store/recall User-defined instrument states with user-defined names in file system
    Power-On state Default settings or state at power-off, selectable
    USB file system
    Front-panel port USB 2.0 high-speed mass storage class (MSC) device
    Capability Read or write instrument configuration settings, instrument states, arbitrary-waveform, and sequence files.
    Speed (nom) 10 MB/s
    General characteristics
    Computer interfaces
    LXI-C (rev. 1.3) 10/100Base-T (Sockets & VXI-11 protocols)  USB 2.0 (USB-TMC488 protocol)  GPIB/IEEE-488.1, IEEE-488.2
    Web user interface Remote operation and monitoring
    Programming language SCPI-1999, IEEE-488.2  Keysight 33210A, 33220A, 33250A, and 33500A/B Series compatible
    Graphical display 4.3-inch color TFT, WQVGA (480x272) with LED backlight
    Real-time clock/calendar battery CR-2032 coin-type, replaceable, >5-year life (typ)
    Mechanical
    Size (nom) 261.1 mm W x 103.8 mm H x 303.2 mm D (with bumpers installed) 
    212.8 mm W x 88.3 mm H x 272.3 mm D (with bumpers removed) 
    2U x ½ rack width
    Weight (nom) 3.5 Kg (7.7 lbs.)
    Модели и опции
    Товар
    Модели и Опции
    Описание
    Цена Заказать
    Модели
    33611A
    Генератор сигналов, 80 МГц, 1 канал
    По запросу
    - шт +
    33612A
    Генератор сигналов, 80 МГц, 2 канала
    По запросу
    - шт +
    33621A
    Генератор сигналов, 120 МГц, 1 канал
    По запросу
    - шт +
    33622A
    Генератор сигналов, 120 МГц, 2 канала
    По запросу
    - шт +
    Библиотека

    Основные сведения о продукте

    Посмотреть более подробную информацию о возможностях этого продукта.

    Технические характеристики

    Отзывы
    Добавить отзыв
    Оцените товар:
    Ваше имя
    Достоинства

    Недостатки

    Комментарий

    Символы на картинке


    Евгений
    9 августа 2019
    Антон
    11 августа 2019
    bitKinggrope
    25 декабря 2020
    CoinBitWrifs
    21 января 2021
    NEMETZ11
    14 октября 2021
    TRYBUS60
    11 ноября 2021
    Список просмотренных товаров пуст
    Список избранного пуст
    Ваша корзина пуста
    Помощь
    Ошибка на сайте? Выдели её и нажми Ctrl+Enter