Генератор сигналов произвольной формы, 65 Гвыб./с

M8195A
Для увеличения картинки наведите мышкой
M8195AM8195AM8195AM8195AM8195AM8195AM8195A
M8195AM8195AM8195AM8195AM8195AM8195AM8195A

Наличие: По запросу

По запросу
По запросу
По запросу

Генераторы сигналов M8195A Подробнее




Американская компания Keysight Technologies начала свою историю в 1930-х годах прошлого века. Сегодня – это лидер в производстве измерительного оборудования и САПР (систем автоматизированного проектирования). Keysight Technologies предлагает интегрированные решения, объединяющие измерения, экстракцию параметров и верификацию разработок.

Компания Keysight Technologies производит осциллографы, анализаторы, измерители, генераторы, источники питания, а также… подробнее





Обзор
Свернуть Развернуть
Основные возможности и технические характеристики

Функциональные возможности

  • Частота дискретизации: до 65 Гвыб./с
  • Высокая плотность каналов: 1, 2 или 4 канала на модуль
  • Встроенная функция калибровки частотной и фазовой характеристики
  • Встроенные функции цифровой обработки сигналов обеспечивают формирование сигналов и искажений в режиме реального времени

Основные характеристики

  • Аналоговая полоса частот: до 20 ГГц
  • Выходное напряжение: до 1 В (размах) для несимметричных сигналов и до 2 В (размах) для дифференциальных сигналов
  • Формирование сигналов со скоростью до 32 Гбод и выше

Система с готовой конфигурацией M8195S, включающая:

  • Генератор сигналов произвольной формы M8195A
  • Шасси в формате AXIe
  • Встроенный контроллер или средства подключения к внешнему компьютеру

Основные области применения

По мере того, как устройства и интерфейсы становятся все более сложными и быстродействующими, генератор сигналов произвольной формы M8195A обеспечивает гибкие возможности по созданию сигналов в области перспективных исследований, для цифровых приложений, оптических и электрических систем связи, широкополосных радиолокационных систем и средств спутниковой связи.

  • Когерентные оптические системы — один модуль M8195A позволяет формировать две пары сигналов с I/Q модуляцией (двойная поляризация = четыре канала) со скоростью 32 Гбод и выше
  • Цифровые многоуровневые и многоканальные сигналы — формирование сигналов NRZ, PAM4, PAM8, DMT и других видов сигналов со скоростью до 32 Гбод; возможность внесения джиттера, межсимвольных помех, шума и других искажений
  • Исследования в области физики, химии, электроники — формирование любых сигналов произвольной формы, задаваемых математическими формулами, сверхкоротких прецизионных импульсов и сверхширокополосных импульсов с линейной частотной модуляцией
  • Широкополосные ВЧ и СВЧ системы — формирование сверхширокополосных ВЧ сигналов с мгновенной полосой от 0 до 20 ГГц для приложений в аэрокосмической, оборонной и телекоммуникационной отраслях

Описание

Быстродействующий генератор сигналов произвольной формы Keysight M8195A имеет аналоговую полосу частот до 20 ГГц, частоту дискретизации до 65 Гвыб./с и до 4 каналов в каждом 1-слотовом модуле в формате AXIe. По мере того, как устройства и интерфейсы становятся все более быстродействующими и более сложными, генератор Keysight M8195A обеспечивает гибкие возможности по формированию сигналов, используемых в области разработки цифровых приложений, в ходе перспективных исследований, для тестирования широкополосных радаров, средств спутниковой связи и оптических систем передачи данных.

Уникальный режим реального времени позволяет сократить время тестирования в сотни раз. Фильтры с конечной импульсной характеристикой и другие функции цифровой обработки сигналов используются для формирования импульсов и изменения экстремальных условий тестирования оптических систем, например, поляризационной модовой дисперсии (PMD) или величины фазового шума.

Генератор сигналов произвольной формы Keysight M8195A — это повышение эффективности тестирования многоканальных высокоскоростных устройств благодаря возможности использования режима реального времени, функции создания последовательностей и глубокой памяти.

Дополнительная информация

Генератор сигналов M8195A может поставляться в составе системного комплекта M8195S, который обеспечивает гибкую конфигурацию в зависимости от необходимого количества каналов.
Помимо самого модуля генератора конфигурация системы включает шасси в формате AXIe, встроенный контроллер или средства подключения к внешнему компьютеру.


Свернуть Развернуть
Основные возможности и технические характеристики

Функциональные возможности

  • Частота дискретизации: до 65 Гвыб./с
  • Высокая плотность каналов: 1, 2 или 4 канала на модуль
  • Встроенная функция калибровки частотной и фазовой характеристики
  • Встроенные функции цифровой обработки сигналов обеспечивают формирование сигналов и искажений в режиме реального времени

Основные характеристики

  • Аналоговая полоса частот: до 20 ГГц
  • Выходное напряжение: до 1 В (размах) для несимметричных сигналов и до 2 В (размах) для дифференциальных сигналов
  • Формирование сигналов со скоростью до 32 Гбод и выше

Система с готовой конфигурацией M8195S, включающая:

  • Генератор сигналов произвольной формы M8195A
  • Шасси в формате AXIe
  • Встроенный контроллер или средства подключения к внешнему компьютеру

Основные области применения

По мере того, как устройства и интерфейсы становятся все более сложными и быстродействующими, генератор сигналов произвольной формы M8195A обеспечивает гибкие возможности по созданию сигналов в области перспективных исследований, для цифровых приложений, оптических и электрических систем связи, широкополосных радиолокационных систем и средств спутниковой связи.

  • Когерентные оптические системы — один модуль M8195A позволяет формировать две пары сигналов с I/Q модуляцией (двойная поляризация = четыре канала) со скоростью 32 Гбод и выше
  • Цифровые многоуровневые и многоканальные сигналы — формирование сигналов NRZ, PAM4, PAM8, DMT и других видов сигналов со скоростью до 32 Гбод; возможность внесения джиттера, межсимвольных помех, шума и других искажений
  • Исследования в области физики, химии, электроники — формирование любых сигналов произвольной формы, задаваемых математическими формулами, сверхкоротких прецизионных импульсов и сверхширокополосных импульсов с линейной частотной модуляцией
  • Широкополосные ВЧ и СВЧ системы — формирование сверхширокополосных ВЧ сигналов с мгновенной полосой от 0 до 20 ГГц для приложений в аэрокосмической, оборонной и телекоммуникационной отраслях

Описание

Быстродействующий генератор сигналов произвольной формы Keysight M8195A имеет аналоговую полосу частот до 20 ГГц, частоту дискретизации до 65 Гвыб./с и до 4 каналов в каждом 1-слотовом модуле в формате AXIe. По мере того, как устройства и интерфейсы становятся все более быстродействующими и более сложными, генератор Keysight M8195A обеспечивает гибкие возможности по формированию сигналов, используемых в области разработки цифровых приложений, в ходе перспективных исследований, для тестирования широкополосных радаров, средств спутниковой связи и оптических систем передачи данных.

Уникальный режим реального времени позволяет сократить время тестирования в сотни раз. Фильтры с конечной импульсной характеристикой и другие функции цифровой обработки сигналов используются для формирования импульсов и изменения экстремальных условий тестирования оптических систем, например, поляризационной модовой дисперсии (PMD) или величины фазового шума.

Генератор сигналов произвольной формы Keysight M8195A — это повышение эффективности тестирования многоканальных высокоскоростных устройств благодаря возможности использования режима реального времени, функции создания последовательностей и глубокой памяти.

Дополнительная информация

Генератор сигналов M8195A может поставляться в составе системного комплекта M8195S, который обеспечивает гибкую конфигурацию в зависимости от необходимого количества каналов.
Помимо самого модуля генератора конфигурация системы включает шасси в формате AXIe, встроенный контроллер или средства подключения к внешнему компьютеру.


Комплектацию Вы можете узнать:
По тел.: +7 (495) 105 96 88 или
Написать нам письмо: info@micro-electronics.ru
Комплектацию Вы можете узнать:
По тел.: +7 (495) 105 96 88 или
Написать нам письмо: info@micro-electronics.ru
Свернуть Развернуть
Сведения о реестре СИ

Номер в Госреестре

Наименование СИ

Обозначение типа СИ

Изготовитель

Срок свидетельства или заводской номер

Не в реестре
Свернуть Развернуть
Сведения о реестре СИ

Номер в Госреестре

Наименование СИ

Обозначение типа СИ

Изготовитель

Срок свидетельства или заводской номер

Не в реестре
  • How to Characterize PAM-4 Transmitters
  • How to test coherent digital signal processors by generating and analyzing transmission impairments
  • Keysight M8195A AWG The Digital and Arbitrary Signal Generator
  • Generating PAM-4 Signals using an M8195A Arbitrary Waveform Generator
  • Using a Keysight Arbitrary Waveform Generator M8195A for optical applications
  • Keysight M8195A AWG within the Mobile & Network Ecosystem
Характеристики
Загрузить технические характеристики

General characteristics
M8195A
Sample rate 53.76 GSa/s to 65.00 GSa/s  or 26.88 GSa/s to 32.50 GSa/s (sample rate divider = 2) or 13.44 GSa/s to 16.25 GSa/s (sample rate divider = 4)
DAC resolution 8 bits
Number of channels per M8195A module 1, 2 or 4 (corresponds to Opt. 001, 002, 004)  Number of channels is software upgradable via license key
Sample memory
M8195A
Internal sample memory 1 MSa per module  (for modes of operation see Sample memory modes table below)
Extended sample memory 2 GSa per M8195A module (standard)16 GSa per M8195A module (with Option 16G)  (for modes of operation see Sample memory modes table below)
Waveform granularity1
Int. memory 128 samples
Ext. memory, sample rate divider = 1 256 samples
Ext. memory, sample rate divider = 2 128 samples
Ext. memory, sample rate divider = 4 64 samples
Minimum waveform length
Int. memory 128 samples
Ext. memory, sample rate divider = 1 1280 samples
Ext. memory, sample rate divider = 2 640 samples
Ext. memory, sample rate divider = 4 320 samples
Sample memory modes
Mode Available with option Sample memory (standard) Sample memory (with Opt. 16G) Max. sample rate Interpolation1 Max. output frequency2 Analog BW (typ) (3 dB)
1 ch, ext.mem. 001, 002, 004 2 GSa 16 GSa 65 GSa/s None > 25 GHz 25 GHz
1 ch, int. mem. 001, 002, 004 1 MSa 1 MSa 65 GSa/s None > 25 GHz 25 GHz
2 ch, ext.mem. 002, 004 1 GSa per ch. 8 GSa per ch. 32.5 GSa/s 2 x 12.8 GHz 25 GHz
2 ch, int.mem. 002, 004 512 KSa per ch. 512 KSa per ch. 65 GSa/s None > 25 GHz 25 GHz
4 ch, ext.mem. 4 0.5 GSa per ch. 4 GSa per ch. 16.25 GSa/s 4 x 6.4 GHz 25 GHz
4 ch, int.mem. 4 256 KSa per ch. 256 KSa per ch. 65 GSa/s None > 25 GHz 25 GHz
Frequency switching characteristics
Effective frequency switching time3 
with Option FSW  38 ps 
without Option FSW > 505 μs
Out 1, 2, 3, 4
Output type Single ended4 or differential
Bandwidth (3 dB, excl. sin(x)∕x roll-off) 25 GHz (typ)
Rise/fall time5 (20% / 80%) 18 ps (typ)
Impedance 50 Ω (nom)
Amplitude 75 mVpp to 1.0 Vpp, single-ended into 50 Ω  150 mVpp to 2.0 Vpp, differential
Amplitude resolution 200 μV (nom)
DC amplitude accuracy6 ±(2.5% +10 mV) (typ)
Voltage window -1.0 V to +3.7 V single-ended into 50 Ω
Offset resolution 200 μV (nom)
DC offset accuracy7 ± 20 mV (typ)
Differential offset In system adjustable to 0 mV
Termination voltage window -1.0 V to + 3.7 V  Vol ≤ 1.5 V: (low level - 500 mV) to (high level +1000 mV)  Vol > 1.5 V: low level to (high level +1000 mV)
Total jitter, with pre-distortion 6 ps (pp) at 32 Gb/s PRBS (nom)
Random jitter, RMS8 200 fs (typ)
1. Interpolation is performed by FIR filters in hardware. For 2x (4x) interpolation, samples are read from memory at a rate up to 32.5 GSa/s (16.25 GSa/s) and interpolated to a DAC sample rate of up to 65 GSa/s. For interpolation = none, the sample rate from memory is the same as the DAC sample rate.
2. With default FIR configuration the maximum sample rate is calculated as 80% of Nyquist. With custom FIR configurations higher output frequencies can be achieved.
3. Effective switching frequency is determined as 1/fmax, with fmax = fSa(max) / 2.5
4. Unused output must be terminated with 50 Ω to GND. In case the termination voltage is not GND, the unused output must be terminated to VTerm.
5. Sample rate 64 GSa/s, output amplitude 500 mVpp(se).
6. Termination voltage = 0 V; adjusted at 23 °C ambient temperature, amplitude increases by 0.2%/°C (typ) for ambient temperature below 23 °C.
7. Termination voltage = 0 V.
8. 10 GHz clock; 1 V ampl.; 60 GSa/s.
Harmonic distortions1’2
2nd harmonic  -45 dBc (typ), fout < 3 GHz
-35 dBc (typ), fout = 3 GHz... 6 GHz
-30 dBc (typ), fout > 6 GHz
3rd harmonic  -45 dBc (typ), fout < 1 GHz
-40 dBc (typ), fout = 1 GHz. 3 GHz
-35 dBc (typ), fout = 3 GHz. 6 GHz
-30 dBc (typ), fout > 6 GHz
Two-tone IMD1 -45 dBc (typ), fout1 = 990 MHz, fout2 = 1010 MHz
SFDR1 (excluding harmonic distortions)
In-band  -80 dBc (typ), fout = 100 MHz, measured DC to 1 GHz
-70 dBc (typ), fout = DC…400 MHz, measured DC to 400 MHz
-48 dBc (typ), fout = DC…4 GHz, measured DC to 4 GHz
-53 dBc (typ), fout = 4 GHz…6 GHz, measured 4 GHz to 6 GHz
-53 dBc (typ), fout = 6 GHz…8 GHz, measured 6 GHz to 8 GHz
-50 dBc (typ), fout = 8 GHz…10 GHz, measured 8 GHz to 10 GHz
-46 dBc (typ), fout = 10 GHz…12 GHz, measured 10 GHz to 12 GHz
-50 dBc (typ), fout = 12 GHz…14 GHz, measured 12 GHz to 14 GHz
-42 dBc (typ), fout = 14 GHz…16 GHz, measured 14 GHz to 16 GHz
-42 dBc (typ), fout = 16 GHz…18 GHz, measured 16 GHz to 18 GHz
-42 dBc (typ), fout = 18 GHz…20 GHz, measured 18 GHz to 20 GHz
-48 dBc (typ), fout = 20 GHz…21 GHz, measured 20 GHz to 21 GHz
-42 dBc (typ), fout = 21 GHz…22 GHz, measured 21 GHz to 22 GHz
-40 dBc (typ), fout=22 GHz....24 GHz, measured 22 GHz to 24 GHz
-40 dBc (typ), fout=24 GHz....26 GHz, measured 24 GHz to 26 GHz
Adjacent band  -48 dBc (typ), fout = DC…4 GHz, measured DC to 8 GHz
-48 dBc (typ), fout = 4 GHz…6 GHz, measured 3 GHz to 8 GHz
-34 dBc (typ), fout = 6 GHz…8 GHz, measured 4 GHz to 10 GHz
-34 dBc (typ), fout = 8 GHz…10 GHz, measured 6 GHz to 12 GHz
-46 dBc (typ), fout = 10 GHz…12 GHz, measured 8 GHz to 14 GHz
-42 dBc (typ), fout = 12 GHz…14 GHz, measured 10 GHz to 16 GHz
-32 dBc (typ), fout = 14 GHz…16 GHz, measured 12 GHz to 18 GHz
-30 dBc (typ), fout = 16 GHz…18 GHz, measured 14 GHz to 20 GHz
-40 dBc (typ), fout = 18 GHz…20 GHz, measured 16 GHz to 22 GHz
-35 dBc (typ), fout=20 GHz....22 GHz, measured 18 GHz to 24 GHz
-30 dBc (typ), fout=22 GHz....24 GHz, measured 20 GHz to 26 GHz
-28 dBc (typ), fout=24 GHz....25 GHz, measured 22 GHz to 27 GHz
-28 dBc (typ), fout=25 GHz....26 GHz, measured 23 GHz to 27 GHz
Amplitude flatness (at SMA connector,3 compensated for sin(x)∕x) ±2 dB (typ), fout= DC…10 GHz
+2 dB, -3 dB (typ), fout = 10…25 GHz (typ)
Connector type 2.92 mm “K-style” (female)
1. Sample rate 64 GSa/s, output amplitude 500 mVpp(se).
2. Measured with a balun (e.g. HL 9405).
3. Measured at Data Out.
Run modes
Continuous
Int. Memory A waveform segment is continuously repeated
Ext. Memory A waveform segment/sequence/scenario is continuously repeated
Triggered
Int. Memory A waveform segment is looped continuously after a trigger event is received
Ext. Memory A waveform segment/sequence/scenario is generated once after a trigger event is received
Gated
Int. Memory A waveform segment is looped continuously after a rising edge of the trigger/gate input
Ext. Memory A waveform segment/sequence/scenario is generated as long as the trigger/gate input is high
Sequencer modes  
The sample memory can be split into a maximum of 16 M waveform segments.  Waveform segments can have different sizes, but the segment size must be the same across channels.  The sequence table can contain up to 16 M entries (sequence IDs).
Arbitrary
Int. Memory One waveform segment of arbitrary length is continuously looped
Ext. Memory
Sequence (requires Opt. SEQ)
Int. Memory Not available
Ext. Memory One or more waveform segments are arranged in a linear sequence. Each segment can be repeated a programmable number of times or until an external event is signaled.
Scenario (requires Opt. SEQ)
Int. Memory Not available
Ext. Memory One or more sequences are arranged in a linear sequence. Each sequence can be repeated a programmable number of times or until an external event is signaled
Trigger/gate input
Input range -4 V to +4 V
Threshold
Range -4 V to +4 V
Resolution 10 mV (nom)
Sensitivity 100 mV (typ)
Polarity Selectable, positive or negative
Input impedance 50 Ω (nom), DC coupled
Connector type SMA (female)
Trigger/gate input
A trigger/gate input is provided on the front panel of the M8195A and the M8197A. The trigger input is used to start/gate waveform playback.
The trigger/gate input of the M8195A affects the channels of that M8195A.  -
Input range -4 V to +4 V
Threshold
Range -4 V to +4 V
Resolution 10 mV (nom)
Sensitivity 100 mV (typ)
Polarity Selectable, positive or negative
Input impedance 50 Ω (nom), DC coupled
Max. toggle rate1
Sample rate divider = 1 Sample rate/3584
Sample rate divider = 2 Sample rate/1792
Sample rate divider = 4 Sample rate/896
Connector type SMA (female)
Trigger output (M8195A only)
The “Trigger output” and “Event input” functions share the same connector on the front panel.  The “Trigger output” functionality is only used in conjunction with the 81195A Optical Modulation Generator Software. For details of using the “Trigger output” functionality, refer to the 81195A data sheet und user guide.
Output impedance M8195A
50 Ω (nom)
Level
Voltage window -0.5 V to 2.0 V
Amplitude 200 mVpp to 2.5 Vpp
Resolution 10 mV
Accuracy ± (10% + 25 mV) (typ)
Rise/fall time (20% to 80%) 150 ps (nom)
Width 20ns (1280 sample clock cycles @ 64GS∕s)
Timing characteristics
The sequencing of a single M8195A can be controlled with the ‘Trigger/Gate Input' as well as the ‘Event Input' of the M8195A. In a synchronous system that consists of one M8197A and up to four M8195A, the sequencing of the entire synchronous system can be controlled with the ‘Trigger/Gate Input' as well as the ‘Event Input' of the M8197A. A single M8195A or a synchronous system can operate asynchronously or synchronously. In case of synchronous operation, a timing requirement between the Reference Clock Output and ‘Trigger/Gate Input' or ‘Event Input' must be met.
Delay M8195A
Trigger/Gate Input to Data Out 40192 sample clock cycles + 0 ns (nom)
Event Input to Data Out 40192 sample clock cycles + 0.15 ns (nom)
Delay accuracy, asynchronous operation
Trigger/Gate Input to Data Out ± 100 ps (typ)
Event Input to Data Out ± 100 ps (typ)
Delay accuracy, synchronous operation
Trigger/Gate Input to Data Out ± 1 ps (typ)
Event Input to Data Out ± 1 ps (typ)
Synchronous operation
Set-up time -2.5 ns (typ) (‘TRIG IN', ‘EVENT IN' to rising edge of ‘REF CLK OUT')
Hold time 5.1 ns (typ) (Rising edge of ‘REF CLK OUT' to ‘TRIG IN', ‘EVENT IN')
Skew between normal and complement 0 ps ± 1 ps (nom)
Skew between any pair of outputs
within one M8195A module 0 ps ± 5 ps (typ) 1
across multiple M8195A modules 0 ps ± 100 ps (typ) 2
Variable channel delay
In order to compensate for external cable length differences as well as the initial skew, channels 1, 2, 3 and 4 can be individually delayed with a very high timing resolution. There are two possibilities to adjust the variable channel delay:
–– The sample clock delay can be changed in discrete steps. The step size is 1 / DAC Sample Frequency. E.g. the step size is 15.625 ps for a DAC Sample Frequency of 64 GHz.
–– The FIR delay can be used for sub sample delay adjust. Note: This delay functionality uses a digitally implemented FIR filter with limited length and accuracy. As a result the output signal may show some degradation when using the FIR delay adjust.
Sample clock delay range 0 ... 95 sample clocks
FIR delay range
Sample Rate Divider = 1 -50 ps...+50 ps
Sample Rate Divider = 2 -100 ps...+100 ps
Sample Rate Divider = 4 -200 ps.+200 ps
FIR delay resolution 10 fs
Variable module delay
In order to compensate for external cable length differences as well as the initial skew, channels 1,2, 3 and 4 can be jointly delayed with a very high timing resolution. In case the M8197A synchronization module is used to configure a synchronous system, the variable delay can be used to align the channels of multiple M8195A modules.  Modifying the variable delay always affects the delay of all four channels.  E.g. setting the variable delay to 10 ps has the following effect. Out 1, 2, 3 and 4 are delayed by 10 ps with respect to trigger/gate input and event input.
Delay range 0 ns to 10 ns
Delay resolution 50 fs
Delay accuracy ± 10 ps (typ)
FIR filter
Each channel in the M8195A has an FIR filter with programmable coefficients in front of its respective DAC. The FIR filters are used to realize variable channel delay and waveform interpolation with sample rate divider 2 and 4. The following presets are available for the FIR filter coefficients: Nyquist, Low Pass, Linear Interpolation, Zero Order Hold and User Defined. The number of taps of each filter is 16 when internal memory is used and depends on the sample rate divider when extended memory is used as shown in the following table:
Sample Rate Divider Taps Memory Sample Rate DAC Sample Rate  
1   16   53.76 GSa/s ... 65.00 GSa/s   53.76 GSa/s . 65.00 GSa/s  
2   32   26.88 GSa/s . 32.50 GSa/s   53.76 GSa/s . 65.00 GSa/s  
3   64   13.44 GSa/s . 16.25 GSa/s   53.76 GSa/s . 65.00 GSa/s  
Reference clock input
The clock reference input is provided on the front panel of each module. The clock reference input of the M8195A is used as the clock reference for all four channels of that M8195A. The clock reference input of the M8197A synchronization module is used as the clock reference for all channels of all M8195A that are combined in a synchronous system.
Input frequency ranges 10 MHz to 300 MHz  210 MHz to 17 GHz
Lock range ± 1% (typ)
Jitter < 2 pspp
Input level  10 MHz - 10 GHz  10 GHz - 17 GHz 250 mVpp to 2 Vpp  500 mVpp to 2 Vpp
Impedance 50 Ω (nom), AC coupled
Connector SMA
Sample clock frequency resolution 1 ppm; e.g. sample clock frequency = 64 GHz => frequency resolution = 64 kHz
Reference clock output
The clock reference output is provided on the front panel of each module.
AXIe backplane clock source
Output frequency fOut1 = fSa / (32 * n) with n = 1...1024 or
fOut2 = fSa / 256
Frequency accuracy ± 20 ppm
Internal clock source
Output frequency fOut1 = fSa / (32 * n) with n = 1.1024 or
fOut2 = fSa / 256 or  fOut2 = 100 MHz
Frequency accuracy See internal synthesizer clock characteristic
External reference clock input frequency fIn = 10 MHz to 300 MHz
Output frequency fOut2 = fIn / (n * m) with n, m = 1.8 or
fOut2 = fSa / 256
Frequency accuracy Depends on external reference clock
External reference clock input frequency fIn = 210 MHz to 17 GHz
Output frequency fOut1 = fSa / (32 * n) with n = 1.1024 or
fOut2 = fSa / 256
Frequency accuracy Depends on external reference clock
Output amplitude 900 mVpp (nom) into 50 Ω
Source impedance 50 Ω (nom), AC coupled
Connector SMA
1. Reference clock output phase shifts when the variable delay is changed.
2. For M8195A: Reference clock output remains unchanged when the variable delay is changed.
3. Warm-up time 2 minutes min.
4. fSa = 64 GHz; reference clock source: internal.
Internal synthesizer clock characteristics
Frequency 53.76 GHz to 65.00 GHz
Accuracy1 0.7 ppm (spec) initial accuracy
± 0.3 ppm aging / year
Frequency resolution 7 digits, e.g. 100 Hz at 1 GHz
Phase noise2 < -115 dBc/Hz (typ) at 10 kHz offset, fOUT = 1 GHz
< -95 dBc/Hz (typ) at 10 kHz offset, fOUT = 10 GHz
Download speed
Download speed is measured by transferring the samples from the controlling PC's memory into the M8195A.
USB using SCPI or IVI PCIe using SCPI3   PCIe using IVI3,4
Download Speed ~8 MSa/s (meas) ~40 MSa/s (meas)   ~400 MSa/s (meas)
Instrument software
The M8195A and M8197A are controlled by a combined soft-front panel and firmware application that runs on an embedded AXIe controller or external PC or laptop.
Supported Operating Systems Windows 7 (32 or 64 bit), Windows 8 / 8.1 (32 or 64 bit), Windows 10 (32 or 64 bit)
Required hard disk space 1 Gb
Interface to hardware PCI Express® or USB
Application programming interfaces SCPI, IVI-COM, LabView
General
Power consumption 180 W (nom) @ 65 GSa/s
Operating temperature 0 °C to 40 °C
Operating humidity 5% to 80% relative humidity, non-condensing
Operating altitude Up to 2000 m
Storage temperature -40 °C to +70 °
Stored states User configurations and factory default
Interface to controlling PC PCIe (see AXIe chassis specification) or USB
Form factor 1-slot AXIe
Dimensions (W x H x D) 322.25 mm x 30 mm x 281.5 mm
Weight 3.75 kg
Safety designed to IEC61010-1, UL61010, CSA22.2 61010.1 tested
EMC tested to IEC61326-1
Warm-up time 30 min
Calibration interval 2 years recommended
Cooling requirements When operating the system choose a location that provides at least 80 mm of clearance at rear, and at least 30 mm of clearance at each side
1. Warm-up time 2 minutes min.
2. fSa = 64 GHz; reference clock source: internal.
3. Using M9048A PCIe adapter.
4. Download of waveform samples without marker information.
Definitions
Specification (spec)
The warranted performance of a calibrated instrument that has been stored for a minimum of 2 hours within the operating temperature range of 0°C to 40°C and after a 45-minute warm up period. All specifications include measurement uncertainty and were created in compliance with ISO-17025 methods. Data published in this document are specifications (spec) only where specifically indicated.
Typical (typ)
The characteristic performance, which 80% or more of manufactured instruments will meet. This data is not warranted, does not include measurement uncertainty, and is valid only at room temperature (approximately 23°C).
Nominal (nom)
The mean or average characteristic performance, or the value of an attribute that is determined by design such as a connector type, physical dimension, or operating speed. This data is not warranted and is measured at room temperature (approximately 23°C).
Measured (meas)
An attribute measured during development for purposes of communicating the expected performance. This data is not warranted and is measured at room temperature (approximately 23°C).
Accuracy
Represents the traceable accuracy of a specified parameter. Includes measurement error and timebase error, and calibration source uncertainty.
Модели и опции
Товар
Модели и Опции
Описание
Цена Заказать
Модели
M8195A
Генератор сигналов произвольной формы, 65 Гвыб./с
По запросу
- шт +
Гарантия, калибровка, сервисное обслуживание
R-50C-011-3
Calibration Assurance Plan - Return to Keysight - 3 years
По запросу
- шт +
R-50C-011-5
Calibration Assurance Plan - Return to Keysight - 5 years
По запросу
- шт +
R-51B-001-3C
Warranty Assurance Plan - Return to Keysight - 3 years
По запросу
- шт +
R-51B-001-5C
Warranty Assurance Plan - Return to Keysight - 5 years
По запросу
- шт +
Опции и аксессуары
M8195A-BU3
Bundle consisting of one M9502A 2-slot AXIe Chassis with USB Option and one M9537A AXIe Embedded PC Controller
По запросу
- шт +
M8195A-FSW
Fast Switching
По запросу
- шт +
M8195A-SCD
Standard Calibration Document
По запросу
- шт +
M8195A-SEQ
Sequencer
По запросу
- шт +
M8195A-U12
Arbitrary Waveform Generator Upgrade of M8195A-R12 or -E52 to Revision 2
По запросу
- шт +
M8195A-U14
Arbitrary Waveform Generator Upgrade of M8195A-R14 or -E54 to Revision 2
По запросу
- шт +
M8195A-Z54
Calibration Certificate for Z540
По запросу
- шт +
81195A-OSP
Optical Signal Properties, transportable, perpetual License
По запросу
- шт +
81195A-RSP
Real-time Signal Processing, transportable, perpetual License
По запросу
- шт +
M8070A-0NP
System Software for M8000 Series of BER Test Solutions, Network/Floating, Perpetual License
По запросу
- шт +
M8195A-001
Arbitrary Waveform Generator, 1 Channel, 65 GSa/s
По запросу
- шт +
M8070A-0TP
System Software for M8000 Series of BER Test Solutions, Transportable, Perpetual License
По запросу
- шт +
M8070A-1NP
DUT Control Interface, Network/Floating, Perpetual License
По запросу
- шт +
M8070A-1TP
DUT Control Interface, Transportable, Perpetual License
По запросу
- шт +
N6171A
MATLAB Software
По запросу
- шт +
N6171A-M01
MATLAB-Basic Package, individual license - node-locked
По запросу
- шт +
N6171A-M02
MATLAB-Standard Package, individual license - node-locked
По запросу
- шт +
N6171A-M03
MATLAB-Advanced Package, individual license - node-locked
По запросу
- шт +
Y1202A
PCIe cable: x8, 2.0m
По запросу
- шт +
M8195A-002
Arbitrary Waveform Generator, 2 Channels, 65 GSa/s
По запросу
- шт +
M8195A-004
Arbitrary Waveform Generator, 4 Channels, 65 GSa/s
По запросу
- шт +
M8195A-16G
Upgrade to 16 GSa Memory
По запросу
- шт +
M8195A-1A7
Calibration + Uncertainties + Guardbanding (Not Accredited)
По запросу
- шт +
M8195A-810
Matched Cable Pair for M8195A AWG, 2.92 mm
По запросу
- шт +
M8195A-BU1
Bundle consisting of one M9505A 5-slot AXIe Chassis with USB Option and one M9537A AXIe Embedded PC Controller
По запросу
- шт +
M8195A-BU2
Bundle consisting of one M9502A 2-slot AXIe Chassis with USB Option
По запросу
- шт +
Библиотека

Основные сведения о продукте

Посмотреть более подробную информацию о возможностях этого продукта.

Технические характеристики

Отзывы
Добавить отзыв
Оцените товар:
Ваше имя
Достоинства

Недостатки

Комментарий

Символы на картинке


Тут еще никто ничего не писал, стань первым!
Список просмотренных товаров пуст
Список избранного пуст
Ваша корзина пуста
Помощь
Ошибка на сайте? Выдели её и нажми Ctrl+Enter