The Ares 1F is designed to perform emission and immunity tests on military and aeronautic devices. The design of the structure is optimised for maximum performances, in minimum space. The shielding and its pyramidal absorbers are manufactured by SIEPEL.

• Compliance & Performances

  CHARACTERISTICS

  • Dimensions

    
    

    Total overall including metallic frame	Internal usable
    4.7 x 3.7 x 2.6 m 15 x 12 x 8 ft	3.8 x 2.8 x 2.1 m 12 x 9 x 7 ft

    
    

    
    

    SHIELDING EFFECTIVENESS COMPLIES WITH EN 50147-1 (10 kHz - 40 GHz)

• About our absorbers

• Quality

• All absorbers batches are tested by SIEPEL for reflectivity

  performances between 30 MHz – 1000 MHz.

• Our raw materials are compliant to RoHS / REACH and free of substances in the current list of Substances of Very High Concern (SVHC) published by the European Chemicals Agency (ECHA).

• HY absorbers power handling: 2 kW/m² (CW).

• Both absorbers coated with either aqueous or plastic paint are classified

  ISO class 4 (ISO 14644-1:2015) clean room conditions.

  
  

  OUR STRENGTHS

   High-quality components & parts

  

   Guarantee of 20 years for the RF performances of our absorbers

   Guaranteed performances

  

   Control of performances before shipment

   Measurement departement accredited ISO/IEC 17025:2005 (accreditation n° 1-6220, scope available on www.cofrac.fr)

   Fast delivery: permanent stock available off the shelves

   Setting-up of the chambers by our dedicated installation team

  CONFIGURATION

  
  

  

  MODULAR SHIELDING

  Self-standing structure up to 18 (40) GHz Steele stiffeners

  
  

  

  

  DOOR

  Single leaf swing door Clearance 0.9 x 2.1 m Manual latching

  
  

  

  

  WALL PANELS

  Penetration panel including coaxial feed- throughs and waveguides

  
  

  

  

  VENTILATION

  Honeycomb air vents

  300 x 300 mm up to 18 (40) GHz

  
  

  

  All rights reserved. Information presented in this document are not contractual & subject to modifications without notice.

  POWER DISTRIBUTION

  

  Power filter single phase 110/230 V - 32 A -

  50/60 Hz

  Power filter three-phase 400 V - 32 A - 50/60 Hz

  Electrical package: power distribution, lighting

  
  

  OPTIMISED ABSORBER LINING

  

  Microwave pyramidal absorbers (optimised lining walls and ceiling)

  Ferrite absorber (full lining of walls and ceiling)

  
  

  

  

  TEST TABLE

  Dimensions: 2.5 x 1 x 0.9 m with metallic ground plane and connection stripes

  
  

  

  

  PROJECT REALISATION

  Project management Technical design & study On-site installation

  
  

  

  

  PERFORMANCE VERIFICATION

  Shielding effectiveness at 900 MHz at critical locations

  
  

  AVAILABLE OPTIONS

  • Shielded control and amplifier rooms

  • Plastic paint for pyramidal absorbers with wide range of colors

  • Other types and dimensions of doors

  • Electrically-assisted door latching/unlatching

  • Antenna positioners

  • Floor hatches with connection points

  • Additional power filters, data filters and special feedthroughs

  • CCTV / Audio monitoring systems

  • Fire detection systems

  • On request, some measurements can be accredited ISO 17025 (accreditation number 1-6220, scope available on www.cofrac.fr).

  • Automotive / RadioCom standards compliance

  • Many other options on demand

FOR OTHER EMC CHAMBERS PLEASE REFER TO OUR DATASHEET

«HOW TO CHOOSE AN ANECHOIC CHAMBER»