Наличие: По запросуПо запросу По запросу По запросу
Американская компания Keysight Technologies начала свою историю в 1930-х годах прошлого века. Сегодня – это лидер в производстве измерительного оборудования и САПР (систем автоматизированного проектирования). Keysight Technologies предлагает интегрированные решения, объединяющие измерения, экстракцию параметров и верификацию разработок.
Компания Keysight Technologies производит осциллографы, анализаторы, измерители, генераторы, источники питания, а также… подробнее
Ключевые возможности и технические характеристики
Описание
Измеритель Keysight 53149A представляет собой полнофункциональный частотомер непрерывных сигналов СВЧ диапазона с цифровым вольтметром постоянного тока и точным измерителем мощности в одном компактном корпусе. Этот прибор обеспечивает выполнение самых распространенных видов измерений в диапазоне частот до 46 ГГц и является идеальным инструментом при монтаже и обслуживании СВЧ каналов связи. При использовании в автоматизированных испытательных системах измеритель Keysight 53149A позволяет экономить пространство в приборной стойке.Ключевые возможности и технические характеристики
Описание
Измеритель Keysight 53149A представляет собой полнофункциональный частотомер непрерывных сигналов СВЧ диапазона с цифровым вольтметром постоянного тока и точным измерителем мощности в одном компактном корпусе. Этот прибор обеспечивает выполнение самых распространенных видов измерений в диапазоне частот до 46 ГГц и является идеальным инструментом при монтаже и обслуживании СВЧ каналов связи. При использовании в автоматизированных испытательных системах измеритель Keysight 53149A позволяет экономить пространство в приборной стойке.
Номер в Госреестре |
Наименование СИ |
Обозначение типа СИ |
Изготовитель |
Срок свидетельства или заводской номер |
---|---|---|---|---|
Не в реестре |
Номер в Госреестре |
Наименование СИ |
Обозначение типа СИ |
Изготовитель |
Срок свидетельства или заводской номер |
---|---|---|---|---|
Не в реестре |
Counter specifications | |||
Frequency range | 53147A | 53148A | 53149A |
Channel 1 | |||
Normal mode | 10 Hz to 125 MHz | 10 Hz to 125 MHz | 10 Hz to 125 MHz |
Low pass filter enabled | 10 Hz to 50 kHz | 10 Hz to 50 kHz | 10 Hz to 50 kHz |
Channel 2 | 50 MHz to 20 GHz | 50 MHz to 26.5 GHz | 50 MHz to 46 GHz |
Sensitivity | |||
Channel 1 | |||
10-30 Hz | 40 mVrms | 40 mVrms | 40 mVrms |
30 Hz-125 MHz | 25 mVrms | 25 mVrms | 25 mVrms |
Channel 2 | |||
50-300 MHz | -20 dBm | -20 dBm | -20 dBm |
0.3-12.4 GHz | -33 dBm | -33 dBm | -33 dBm |
12.4-18 GHz | -33 dBm | -33 dBm | -30 dBm |
18-20 GHz | -29 dBm | -29 dBm | -27 dBm |
20-26.5 GHz | N/A | -25 dBm | -27 dBm |
26.5-40 GHz | N/A | N/A | -23 dBm |
40-46 GHz | N/A | N/A | -17 dBm |
Maximum input | |||
Channel 1 | 2 Vrms | 2 Vrms | 2 Vrms |
Channel 2 | |||
50 MHz to 2 GHz | +5 dBm | +5 dBm | +5 dBm |
2-46 GHz | +13 dBm | +13 dBm | +13 dBm |
Damage level | |||
Channel 1 | 120 V (dc + ac pk) linearly derated to 5 Vrms at 125 MHz | 120 V (dc + ac pk) linearly derated to 5 Vrms at 125 MHz | 120 V (dc + ac pk) linearly derated to 5 Vrms at 125 MHz |
Channel 2 | +27 dBm | +27 dBm | +27 dBm |
Impedance (nominal) | |||
Channel 1 | 1 MΩ∕60 pF | 1 MΩ∕60 pF | 1 MΩ∕60 pF |
Channel 2 | 50 Ω | 50 Ω | 50 Ω |
Connector | |||
Channel 1 | BNC female | BNC female | BNC female |
Channel 2 | SMA/APC-3.5 | SMA/APC-3.5 | 2.92 mm removable, |
compatible female | compatible female | SMA/APC-3.5 compatible female | |
SWR (typical) | |||
Channel 2 | |||
50-300 MHz | 1.5:1 | 1.5:1 | 1.5:1 |
0.3-10 GHz | 2.0:1 | 2.0:1 | 2.0:1 |
10-20 GHz | 3.0:1 | 3.0:1 | 3.0:1 |
20-26.5 GHz | N/A | 3.0:1 | 2.5:1 |
26.5-46 GHz | N/A | N/A | 2.5:1 |
Coupling | |||
Channel 1 | ac | ac | ac |
Channel 2 | ac | ac | ac |
Emissions (typical) (“kickback noise”) | 53147A | 53148A | 53149A |
Channel 1 | N/A | N/A | N/A |
Channel 2 (measuring/no input) | -40 dBm∕< -70 dBm | -40 dBm/< -70 dBm | -40 dBm/< - 70 dBm |
Resolution selection | |||
Channel 1 and 2 | 1 Hz to 1 MHz | 1 Hz to 1 MHz | 1 Hz to 1 MHz |
Accuracy | |||
Channel 1 and 2, LSD = resolution selected |
± 1 LSD ± residual stability ± (timebase error x frequency) |
± 1 LSD ± residual stability ± (timebase error x frequency) |
± 1 LSD ± residual stability ± (timebase error x frequency) |
Residual stability (counter and source tied to same timebase) | |||
Channel 1 | N/A | N/A | N/A |
Channel 2 | 0.6 LSD rms | 0.8 LSD rms | 1.25 LSD rms |
Measurement time (typical) | |||
Channel 1 | 1/resolution + 30 ms | 1/resolution + 30 ms | 1/resolution + 30 ms |
Channel 2 | 1/Resolution + Acquisition time + 30 ms | 1/Resolution + Acquisition time + 30 ms | 1/Resolution + Acquisition time + 30 ms |
Acquisition time (typical) (1 MHz FM rate, power meter off) | |||
Channel 1 | N/A | N/A | N/A |
Channel 2 (FM Auto/FM Off) | 150 ms/125 ms | 150 ms/125 ms | 165 ms/140 ms |
FM tolerance | |||
Channel 1 | N/A | N/A | N/A |
Channel 2 FM Auto | 20 MHz p-p max at 10 MHz rate | 20 MHz p-p max at 10 MHz rate |
20 MHz p-p max to 26.5 GHz, 12 MHz p-p max above 26.5 GHz at 10 MHz rate |
Channel 2 FM Off | 1 MHz p-p at 10 MHz rate | 1 MHz p-p at 10 MHz rate | 1 MHz p-p at 10 MHz rate |
AM tolerance | |||
Channel 1 and 2 | Any index provided minimum signal level is not less than sensitivity | Any index provided minimum signal level is not less than sensitivity | Any index provided minimum signal level is not less than sensitivity |
Amplitude discrimination | |||
Channel 1 | N/A | N/A | N/A |
Channel 2 < 300 MHz | N/A | N/A | N/A |
Channel 2 > 300 MHz | Automatically measures the largest signal present provided signal is > 10 dB (typical) above any signal separated by less than 75 MHz; > 20 dB (typical) above any signal separated by more than 75 MHz | Automatically measures the largest signal present provided signal is > 10 dB (typical) above any signal separated by less than 75 MHz; > 20 dB (typical) above any signal separated by more than 75 MHz | Automatically measures the largest signal present provided signal is > 10 dB (typical) above any signal separated by less than 75 MHz; > 20 dB (typical) above any signal separated by more than 75 MHz |
Timebase | |||
Frequency | 10 MHz | ||
Output | 10 MHz sine wave, 1 Vrms into 50 Ω | ||
External timebase input | 1, 2, 5, 10 MHz; 1 to 5 Vrms into 50 Ω | ||
Connector | BNC female located on rear panel | ||
Internal timebase stability | TCXO (standard) | Oven (Option 001) | |
Aging rate per day | N/A | < 5 x 10-10 | |
Aging rate per month | < 1 x 10-7 | < 1.5 x 10-8 | |
Short term (1 sec. average time) | < 1 x 10-9 | < 2 x 10-10 | |
Line variation (± 10%) | < 1 x 10-7 | < 1 x 10-10 | |
Warm-up | N/A | < 1 x 10-8 within 5 min. after turn-on at 25 °C | |
Temperature stability (0-55 °C) | < 1 x10-6 | < 1 x 10-8 | |
Power meter specifications | |||
Frequency range | 100 kHz to 50 GHz, sensor dependent. | ||
Power range | -70 to +44 dBm, sensor dependent. | ||
Power sensors supported | 8480 Series (see table on page 8) | ||
Resolution | 0.01 dB in log mode, 0.1% of full scale in linear mode. | ||
Display units | |||
Absolute | dBm or Watts | ||
Relative | dB or % | ||
Accuracy | |||
Instrumentation | ± 0.02 dB or ± 0.5%. Add power sensor linearity specification for overall system accuracy. | ||
Zero set (digital setting capability of zero) | Sensor dependent (see table on page 8) | ||
Power reference | |||
Power output | 1.00 mW. Factory set to ± 0.7%, traceable to NIST. | ||
Accuracy | ± 1.2% worst case (± 0.9 RSS) for one year | ||
Frequency | 50 MHz (nominal) | ||
Connector | N (f) | ||
DVM specifications | |||
Function | DC volts | ||
Range | ± 50 Vdc | ||
Resolution | 2 mV | ||
Accuracy | ± 0.25% of reading ± 10 mV | ||
Damage level | ± 60 Vdc | ||
Input resistance | 0.5 MΩ (nominal) | ||
Connector | 4 mm banana sockets | ||
Display | Replaces frequency display when DVM activated | ||
General information | |||
Save and recall | Up to 9 complete instrument setups may be saved and later recalled. These setups are retained when power is removed. | ||
Sample rate | User-selectable fast (nominally 20 ms between readings), medium (nominally 250 ms between readings), slow (nominally 1 s between readings) and hold. | ||
Counter gate time | 1/resolution selected | ||
Math functions | |||
Offset (relative/fixed) | Last reading and/or entered offset to reading for either power or frequency | ||
Averaging | 1 to 99 measurement running average | ||
Display | Backlit LCD. Backlight can be turned on or off via front panel control. | ||
Sleep mode (Option 002 only) | Backlight automatically shuts off if no input signal and power sensor present, and no keys pressed, for 5 minutes (nominal). | ||
Self test | Count and power meter circuitry and internal memory automatically tested at startup, via menu selection, or remotely. Error messages displayed to indicate failed tests. | ||
Programming | |||
Interface | GPIB (IEEE-488.1-1987, IEEE 488.2-1987) and RS-232 | ||
Language | SCPI-1992.0 (Standard Commands for Programmable Instruments) | ||
RS-232 rates | User selectable 2400 to 19200 baud | ||
Power supply | |||
ac | 90-132 Vac; 47.5-66 Hz or 360-440 Hz 216-264 Vac; 47.5-66 Hz | ||
Line selection | automatic | ||
Power requirements | 80 VA max. (32 W typical) | ||
dc (Option 002 only) Battery (Option 002) | 11-18 Vdc; 2A max. | ||
Type | VHS camcorder, lead acid (2 each) | ||
Charge time | 8 hours in unit (typical) | ||
Capacity | 2 hours min. at 25 °C | ||
Size |
330 mm W x 156 mm H x 376 mm D with bumpers and handles. Rack panel is full EIA width and 3U ISO height. |
||
Operating temperature | 0-55 °C | ||
With battery option | 0-40 °C | ||
Weight (nominal) |
4.5 kg without battery option, 6.6 kg with battery option |
||
Safety | Designed in compliance with IEC-1010, CAN/CSA 1010.1 | ||
EMC | Designed in compliance with IEC-11, EN50082-1, IEC801-2, -3, -4 |
Товар |
|
|
Модели и Опции |
Описание |
Цена | Заказать |
0
Модели |
53149A
|
СВЧ частотомер/измеритель мощности/цифровой вольтметр 46 ГГц
|
$24 582 |
1
Гарантия, калибровка, сервисное обслуживание |
R-50C-011-3
|
Calibration Plan - Return to Keysight - 3 years
|
По запросу | ||
R-50C-011-5
|
Calibration Plan - Return to Keysight - 5 years
|
$1 966.25 | ||
R-51B-001-5Z
|
Extended Warranty - Return to Keysight - 5 years
|
$412.50 |
4
Опции и асессуары |
53149A-912
|
Power cord - Denmark
|
По запросу | ||
53149A-917
|
Power cord - India
|
По запросу | ||
53149A-918
|
Power cord - Japan - 100V
|
По запросу | ||
53149A-919
|
Power cord - Israel
|
По запросу | ||
53149A-920
|
Power cord - Argentina
|
По запросу | ||
53149A-921
|
Power cord - Chile
|
По запросу | ||
53149A-922
|
Power cord - China - 250V
|
По запросу | ||
53149A-927
|
Power cord - Thailand and Philippines
|
По запросу | ||
10833A
|
GPIB Cable, 1 meter
|
$121.65 | ||
53146A
|
Soft Carrying Case for 5314xA Microwave Counters
|
$334 | ||
53149A-001
|
High Stability Oven Timebase
|
$1 348 | ||
82357B
|
Интерфейс USB/GPIB
|
$923.75 | ||
53149A-007
|
Soft Carrying Case
|
$334 | ||
53149A-1CM
|
Rackmount Kit
|
$467 | ||
53149A-900
|
Power cord - United Kingdom
|
По запросу | ||
53149A-901
|
Power cord - Australia and New Zealand
|
По запросу | ||
53149A-902
|
Power cord - Continental Europe
|
По запросу | ||
53149A-903
|
Power cord - United States and Canada - 120V
|
По запросу | ||
53149A-906
|
Power cord - Switzerland
|
По запросу |