Калибратор температуры/давления

525B
Для увеличения картинки наведите мышкой
525B525B
525B525B

Наличие: По запросу

По запросу
По запросу
По запросу

Электрические калибраторы 525B Подробнее




Общие сведения о компании

С момента своего основания в 1948 г. компания Fluke принимала участие в определении и развитии рынка уникальных технологий по тестированию и диагностике неисправностей. Данные направления приобрели критически важное значение в производственных и обслуживающих отраслях. Каждое новое предприятие, офис, больница или завод являются потенциальным потребителем продукции Fluke.

Приборы Fluke обеспечивают ведение бизнеса и бесперебойное производство по всему миру в самых различных отраслях: от промышленных электронных установок до прецизионных… подробнее





Обзор
Свернуть Развернуть
Основные возможности и технические характеристики

Superior accuracy and functionality in an economical benchtop package

The 525B Temperature/Pressure Calibrator gives you a workhorse combination of high accuracy and broad functionality for temperature and pressure instrument calibration. Compact and economical, the 525B has an interface for automated calibration, providing wide workload coverage in instrument shops and calibration labs, as well as in ATE applications.

The 525B is the most accurate Fluke Calibration temperature calibrator, sourcing and measuring a complete range of RTDs, thermocouples, and thermistors. It also measures pressure covering common ranges from 1 inch (6900 Pa) of water up to 10,000 PSI (69 Mpa) using the Fluke Calibration 700 Series or pressure modules. Plus, the dc voltage and current specifications of the 525B enable you to calibrate other process calibrators and a wide variety of other instruments with accuracy that rivals any calibrator in its price range.

  • Simulates and measures all ANSI thermocouples, as well as L and U types, and provides cold junction compensation to enable calibration of a wide variety of thermocouple instrumentation.
  • Direct input for storage of ITS-90 RTD constants.
  • RTD source uncertainties to 0.03° C
  • Extend pressure measurement range with any Fluke 750P and 700P Series Pressure Modules
  • Converts easily to any pressure unit directly from the front panel or through remote communications.
  • Sources dc voltage and current for multifunction workload coverage, enabling calibration of data loggers, strip chart recorders, multimeters, and other industrial instruments.
  • Supports automation using MET/CAL® Plus Calibration Management Software or custom automated programs with standard RS-232-C and GPIB interface.
  • Eight user programmable setpoints allow quick recall of values for Zero, Span and linearity checks during calibration. Programmable setpoint dwell times for automated calibration and troubleshooting.
  • Programmable setpoint dwell times for automated calibration and troubleshooting.
  • Selectable internal or external CJC (cold junction compensation) provides you with the ability to make exacting thermocouple measurements using remote junctions.
  • Easy five-way binding posts for low-loss convenient hookup. Banana plug, screw terminal, spade lug, wraparound terminal, wire pass-through terminal.
  • NIST-traceable calibration with data is included.
  • At home in the cal lab

    The 525B is a compact bench instrument well suited for traditional calibration laboratories with a large temperature workload. Its 0-100V output and 0-100 mA current capabilities – plus its ability to serve as a highly-accurate pressure standard – make it a versatile performer.

    Filling the gap in the instrument shop

    In process plant environments, instrument shop technicians responsible for maintaining the equipment pool need to calibrate and repair a wide range of instruments, transmitters, field calibrators, P/I converters, transducers, and temperature probes. With its ability to simulate almost any temperature sensor, precise pressure monitoring capability, and dc voltage and current accuracy rivaling any calibrator in its price range, the 525B fills the gap between lower accuracy handheld field calibrators and more expensive high-end multifunction calibrators.

    A good fit for ATE test applications

    With precise calibration-grade instrument control enabled via an IEEE bus, the 525B is a hard working addition to automated test systems in quality and manufacturing test applications requiring capabilities such as voltage and current sourcing, sensor simulation, and temperature monitoring and validation.

    Powerful functionality that is easy to use

    From start to finish, the 525B is designed for ease of operation. The intuitive front panel design features large keypads and display that help reduce training time and make the 525B comfortable to use even for long periods of time. Plus, you can store frequently used constants for a variety of probes in memory for faster setup on the job.

    MET/CAL® Plus automates 525B calibration and documentation management

    You can use the 525B with MET/CAL Plus Calibration Software (v 6.11 or later) to meet the stringent documentation and reporting requirements imposed by quality standards such as ISO 9000. MET/CAL Plus is a powerful software environment for creating, editing, testing, and documenting calibration procedures, and for performing automated calibrations.

    Pressure modules

    An optional set of external pressure modules provides pressure measurement capability. The 525B can accept either the Fluke Calibration 700 Series pressure modules. These modules plug directly into the calibrator’s front panel Lemo connector; the 525B firmware auto-detects the type and value of the attached module.

    Свернуть Развернуть
    Основные возможности и технические характеристики

    Superior accuracy and functionality in an economical benchtop package

    The 525B Temperature/Pressure Calibrator gives you a workhorse combination of high accuracy and broad functionality for temperature and pressure instrument calibration. Compact and economical, the 525B has an interface for automated calibration, providing wide workload coverage in instrument shops and calibration labs, as well as in ATE applications.

    The 525B is the most accurate Fluke Calibration temperature calibrator, sourcing and measuring a complete range of RTDs, thermocouples, and thermistors. It also measures pressure covering common ranges from 1 inch (6900 Pa) of water up to 10,000 PSI (69 Mpa) using the Fluke Calibration 700 Series or pressure modules. Plus, the dc voltage and current specifications of the 525B enable you to calibrate other process calibrators and a wide variety of other instruments with accuracy that rivals any calibrator in its price range.

  • Simulates and measures all ANSI thermocouples, as well as L and U types, and provides cold junction compensation to enable calibration of a wide variety of thermocouple instrumentation.
  • Direct input for storage of ITS-90 RTD constants.
  • RTD source uncertainties to 0.03° C
  • Extend pressure measurement range with any Fluke 750P and 700P Series Pressure Modules
  • Converts easily to any pressure unit directly from the front panel or through remote communications.
  • Sources dc voltage and current for multifunction workload coverage, enabling calibration of data loggers, strip chart recorders, multimeters, and other industrial instruments.
  • Supports automation using MET/CAL® Plus Calibration Management Software or custom automated programs with standard RS-232-C and GPIB interface.
  • Eight user programmable setpoints allow quick recall of values for Zero, Span and linearity checks during calibration. Programmable setpoint dwell times for automated calibration and troubleshooting.
  • Programmable setpoint dwell times for automated calibration and troubleshooting.
  • Selectable internal or external CJC (cold junction compensation) provides you with the ability to make exacting thermocouple measurements using remote junctions.
  • Easy five-way binding posts for low-loss convenient hookup. Banana plug, screw terminal, spade lug, wraparound terminal, wire pass-through terminal.
  • NIST-traceable calibration with data is included.
  • At home in the cal lab

    The 525B is a compact bench instrument well suited for traditional calibration laboratories with a large temperature workload. Its 0-100V output and 0-100 mA current capabilities – plus its ability to serve as a highly-accurate pressure standard – make it a versatile performer.

    Filling the gap in the instrument shop

    In process plant environments, instrument shop technicians responsible for maintaining the equipment pool need to calibrate and repair a wide range of instruments, transmitters, field calibrators, P/I converters, transducers, and temperature probes. With its ability to simulate almost any temperature sensor, precise pressure monitoring capability, and dc voltage and current accuracy rivaling any calibrator in its price range, the 525B fills the gap between lower accuracy handheld field calibrators and more expensive high-end multifunction calibrators.

    A good fit for ATE test applications

    With precise calibration-grade instrument control enabled via an IEEE bus, the 525B is a hard working addition to automated test systems in quality and manufacturing test applications requiring capabilities such as voltage and current sourcing, sensor simulation, and temperature monitoring and validation.

    Powerful functionality that is easy to use

    From start to finish, the 525B is designed for ease of operation. The intuitive front panel design features large keypads and display that help reduce training time and make the 525B comfortable to use even for long periods of time. Plus, you can store frequently used constants for a variety of probes in memory for faster setup on the job.

    MET/CAL® Plus automates 525B calibration and documentation management

    You can use the 525B with MET/CAL Plus Calibration Software (v 6.11 or later) to meet the stringent documentation and reporting requirements imposed by quality standards such as ISO 9000. MET/CAL Plus is a powerful software environment for creating, editing, testing, and documenting calibration procedures, and for performing automated calibrations.

    Pressure modules

    An optional set of external pressure modules provides pressure measurement capability. The 525B can accept either the Fluke Calibration 700 Series pressure modules. These modules plug directly into the calibrator’s front panel Lemo connector; the 525B firmware auto-detects the type and value of the attached module.

    Комплектацию Вы можете узнать:
    По тел.: +7 (495) 105 96 88 или
    Написать нам письмо: info@micro-electronics.ru
    Комплектацию Вы можете узнать:
    По тел.: +7 (495) 105 96 88 или
    Написать нам письмо: info@micro-electronics.ru
    Свернуть Развернуть
    Сведения о реестре СИ

    Номер в Госреестре

    Наименование СИ

    Обозначение типа СИ

    Изготовитель

    Срок свидетельства или заводской номер

    43755-10
    Калибратор температуры и давления с модулем давления
    FLUKE 525B (калибратор) 525A-P29 (модуль)
    Фирма "Fluke Corporation", США
    зав.№ калибратор №9748163, модуль давления 525A-P29 №592821
    Свернуть Развернуть
    Сведения о реестре СИ

    Номер в Госреестре

    Наименование СИ

    Обозначение типа СИ

    Изготовитель

    Срок свидетельства или заводской номер

    43755-10
    Калибратор температуры и давления с модулем давления
    FLUKE 525B (калибратор) 525A-P29 (модуль)
    Фирма "Fluke Corporation", США
    зав.№ калибратор №9748163, модуль давления 525A-P29 №592821
    Характеристики
    Загрузить технические характеристики

    Specifications One Year (Source)
    Voltage (1 ma Max Load)
    0 to 100 V  
    Best one year specification:  25 ppm of setting
    Current (10V Compliance
    0 - 100 mA  
    Best one year specification:  100 ppm of setting
    Resistance
    0 - 4,000 Ohms  
    Best one year specification:  0.001 Ohms
    Thermocouple (B,C,E,J,K,L,N,R,S,T,U)
    Standard thermocouple ranges  
    Best one year specification:  0.12° C (type E)
    Specifications One Year (Measure)
    SPRT 25.5 Ohm
    - 200° C to 660° C  
    Best one year specification:  0.02 C
    Resistance
    0 - 4,000 Ohms  
    Best one year specification:  0.02 Ohms
    Thermocouple (B, C, E, J, K, L, N, R, S, T, U)
    Standard thermocouple ranges  
    Best one year specification:  0.12° C (type T)
    RTD*
    -200° C to 660° C  
    Best one year specification:  0.015° C (pt 100)
    Ni 120
    - 80° C to 100° C  
    Best one year specification:  0.01° C
    Cu 10
    - 100° C to 260° C  
    Best one year specification:  0.06° C
    YSI 400 thermistor
    15° C to 50° C  
    Best one year specification:  0.007° C
    General Specifications
    Settling Time
       Less than 5 seconds
    Standard Interfaces
    Standard RS-232;  
    IEEE (GPIB)  
    Temperature Performance
    Operating:  0° C to 50° C
    Calibration (tcal):  15° C to 35° C
    Storage:  - 20° C to 70° C
    Temperature Coefficient
       Temperature coefficient for temperatures outside tcal + 5° C is 10 % of the 90 day specification per °C
    RH
    Operating:  < 80% to 30° C, < 70 % to 40° C, 40 % to 50° C
    Storage:  <95%, noncondensing
    Analog Low Isolation
       20V
    EMC
       IEC 61326- 1/1997 (EMC)
    Calibration Documentation Report of calibration with data included; 17025 accredited report optional
    Weight/Dimensions
       9 lbs (4 kg) ; H 5.25" x W 12.5" x D 18.6" (H 13.1 cm x W 31.3 cm x D 47.3 cm)
    Модели и опции
    Товар
    Модели и Опции
    Описание
    Цена Заказать
    Модели
    525B
    Калибратор температуры/давления
    По запросу
    - шт +
    Опции
    FLUKE-750P22
    Модуль давления (0 - 70 мбар)
    По запросу
    - шт +
    FLUKE-750P03
    Модуль давления (0 - 350 мбар)
    По запросу
    - шт +
    FLUKE-750P23
    Модуль давления (0 - 350 мбар)
    По запросу
    - шт +
    FLUKE-750P04
    Модуль давления (0 - 1 бар)
    По запросу
    - шт +
    FLUKE-750P24
    Модуль давления (0 - 1 бар)
    По запросу
    - шт +
    FLUKE-750P05
    Модуль давления (0 - 2 бар)
    По запросу
    - шт +
    FLUKE-750P06
    Модуль давления (0 - 7 бар)
    По запросу
    - шт +
    FLUKE-750P27
    Модуль давления (0 - 20 бар)
    По запросу
    - шт +
    FLUKE-750P07
    Модуль давления (0 - 35 бар)
    По запросу
    - шт +
    FLUKE-750P08
    Модуль давления (0 - 70 бар)
    По запросу
    - шт +
    HART-5699F
    Температурный пробник Hart Scientific 5699
    По запросу
    - шт +
    FLUKE-750P09
    Модуль давления (0 - 100 бар)
    По запросу
    - шт +
    FLUKE-750P29
    Модуль давления (0 - 200 бар)
    По запросу
    - шт +
    FLUKE-750P30
    Модуль давления (0 - 340 бар)
    По запросу
    - шт +
    FLUKE-750P31
    Модуль давления (0 - 700 бар)
    По запросу
    - шт +
    FLUKE-750PA3
    Модуль давления (0 - 350 мбар)
    По запросу
    - шт +
    FLUKE-750PA4
    Модуль давления (0 - 1 бар)
    По запросу
    - шт +
    FLUKE-750PA5
    Модуль давления (0 - 2 бар)
    По запросу
    - шт +
    FLUKE-750PA6
    Модуль давления (0 - 7 бар)
    По запросу
    - шт +
    FLUKE-750PV3
    Модуль давления (-350 мбар)
    По запросу
    - шт +
    FLUKE-750PV4
    Модуль давления (-1 бар)
    По запросу
    - шт +
    FLUKE-700PCK
    Калибровочный набор модуля давления
    По запросу
    - шт +
    FLUKE-750PD2
    Модуль давления (-70 - 70 мбар)
    По запросу
    - шт +
    FLUKE-750PD3
    Модуль давления (-350 - 350 мбар)
    По запросу
    - шт +
    FLUKE-750PD4
    Модуль давления (-1 - 1 бар)
    По запросу
    - шт +
    FLUKE-750PD5
    Модуль давления (-1 - 2 бар)
    По запросу
    - шт +
    FLUKE-750PD6
    Модуль давления (-1 - 7 бар)
    По запросу
    - шт +
    FLUKE-750PD7
    Модуль давления (-1 - 14 бар)
    По запросу
    - шт +
    5520A-525A/LEADS
    Тестовые щупы
    По запросу
    - шт +
    MET/CAL driver
    MET/CAL драйверы
    По запросу
    - шт +
    525A/CASE
    Кейс для транспортировке
    По запросу
    - шт +
    Y525
    Набор для монтажа в стойку
    По запросу
    - шт +
    FLUKE-700PTP-1
    Тестовый пневматический насос
    По запросу
    - шт +
    FLUKE-700PRV-1
    Клапан сброса давления для 700HTP
    По запросу
    - шт +
    FLUKE-700PMP
    Напорный насос (10 бар)
    По запросу
    - шт +
    FLUKE-750P00
    Модуль давления (0 - 2.5 мбар)
    По запросу
    - шт +
    FLUKE-750P01
    Модуль давления (0 - 25 мбар)
    По запросу
    - шт +
    FLUKE-750P02
    Модуль давления (0 - 70 мбар)
    По запросу
    - шт +
    Библиотека

    Основные сведения о продукте

    Посмотреть более подробную информацию о возможностях этого продукта.

    Технические характеристики

    Отзывы
    Добавить отзыв
    Оцените товар:
    Ваше имя
    Достоинства

    Недостатки

    Комментарий

    Символы на картинке


    Тут еще никто ничего не писал, стань первым!
    Список просмотренных товаров пуст
    Список избранного пуст
    Ваша корзина пуста
    Помощь
    Ошибка на сайте? Выдели её и нажми Ctrl+Enter