Анализатор спектра/Анализатор сигналов с диапазоном частот от 9 кГц до 42,5 ГГц
Наличие: По запросуПо запросу По запросу По запросу
Анализаторы спектра MS2850A Подробнее
Японская корпорация Anritsu (Anritsu Corporation) - ведущий производитель контрольного и измерительного оборудования для постоянного контроля и тестирования систем коммуникаций на всех стадиях: исследования и разработки, производства, ввода в эксплуатацию и технического обслуживания.Первым предшественником Anritsu была компания Sekisan-sha, основанная в 1895 году. Затем последовала Annaka Electric Company, производящая беспроводные передатчики и первый автоматический общественный телефон Японии. 17 марта 1931 года в результате слияния двух компаний Annaka… подробнее
Обзор
Frequency range: 9 kHz to 32 GHz/44.5 GHz
Analysis bandwidth: 255 MHz (standard), 510 MHz (option), 1 GHz (option)
Standard installed functions: Spectrum analyzer, Signal analyzer (FFT analysis function), Microwave preselector bypass, USB power sensor connection
Options: Preamp, Low secondary harmonic distortion, Noise floor reduction (NFR) function, External interface for high speed data transfer PCIe/USB3.0
Measurement Applications (options): 5G Measurement Software, LTE-Advanced FDD/TDD Measurement Software, Phase Noise Measurement Function, Noise Figure Measurement Function, etc.
Supports external high-performance waveguide mixer (50 to 90 GHz) and harmonic mixer (up to 325 GHz)
Built-in 5G measurement software supports efficient development and production
Maximum analysis bandwidth: 1 GHz
Excellent amplitude and phase flatness performance
Wide dynamic range measurement: >140 dB
Long-term capture using large memory
With PCIe/USB3.0 connector equipped
Frequency range: 9 kHz to 32 GHz/44.5 GHz
Analysis bandwidth: 255 MHz (standard), 510 MHz (option), 1 GHz (option)
Standard installed functions: Spectrum analyzer, Signal analyzer (FFT analysis function), Microwave preselector bypass, USB power sensor connection
Options: Preamp, Low secondary harmonic distortion, Noise floor reduction (NFR) function, External interface for high speed data transfer PCIe/USB3.0
Measurement Applications (options): 5G Measurement Software, LTE-Advanced FDD/TDD Measurement Software, Phase Noise Measurement Function, Noise Figure Measurement Function, etc.
Supports external high-performance waveguide mixer (50 to 90 GHz) and harmonic mixer (up to 325 GHz)
Built-in 5G measurement software supports efficient development and production
Maximum analysis bandwidth: 1 GHz
Excellent amplitude and phase flatness performance
Wide dynamic range measurement: >140 dB
Long-term capture using large memory
With PCIe/USB3.0 connector equipped
Power Cord
USB Memory (≥1 GB)
USB Mouse
Install DVD-ROM (Application software, instruction manual DVD-ROM)
Power Cord
USB Memory (≥1 GB)
USB Mouse
Install DVD-ROM (Application software, instruction manual DVD-ROM)
Свернуть
Развернуть
Основные возможности и технические характеристики
For next-generation broadband and multicarrier communication system, such as 5G mobile and broadcast satellites
- All-in-one 5G NR/V5G (sub-6 GHz/mmWave) coverage
- High EVM performance due to wide dynamic range (EVM: <1%)
- One-button dynamic-range optimization at EVM measurement
- Multicarrier batch (all-at-once) analysis
- Amplitude/phase/timing difference measurement for each carrier
- Transfers captured data to external PC at faster speed than 1000BASE-T
Свернуть
Развернуть
Основные возможности и технические характеристики
For next-generation broadband and multicarrier communication system, such as 5G mobile and broadcast satellites
- All-in-one 5G NR/V5G (sub-6 GHz/mmWave) coverage
- High EVM performance due to wide dynamic range (EVM: <1%)
- One-button dynamic-range optimization at EVM measurement
- Multicarrier batch (all-at-once) analysis
- Amplitude/phase/timing difference measurement for each carrier
- Transfers captured data to external PC at faster speed than 1000BASE-T
Свернуть
Развернуть
Комплектация
Свернуть
Развернуть
Комплектация
Свернуть
Развернуть
Сведения о реестре СИ
|
Номер в Госреестре |
Наименование СИ |
Обозначение типа СИ |
Изготовитель |
Срок свидетельства или заводской номер |
|---|---|---|---|---|
| Не в реестре | ||||
Свернуть
Развернуть
Сведения о реестре СИ
|
Номер в Госреестре |
Наименование СИ |
Обозначение типа СИ |
Изготовитель |
Срок свидетельства или заводской номер |
|---|---|---|---|---|
| Не в реестре | ||||
Характеристики
Загрузить технические характеристики
| Frequency Range | |||
| 9 kHz to 32 GHz | (MS2850A-047) | ||
| 9 kHz to 44.5 GHz | (MS2850A-046) | ||
| Signal Analyzer Functions (at >31.25 MHz Analysis Bandwidth) | |||
| 800 MHz to 32 GHz | (MS2850A-047) | ||
| 800 MHz to 44.5 GHz | (MS2850A-046) | ||
| Frequency Setting Range | |||
| Spectrum Analyzer Function | |||
| -100 MHz to 32.5 GHz | (MS2850A-047) | ||
| -100 MHz to 45 GHz | (MS2850A-046) | ||
| Signal Analyzer Function | |||
| Analysis Bandwidth <31.25 MHz | |||
| 0 MHz to 32 GHz | (MS2850A-047) | ||
| 0 MHz to 44.5 GHz | (MS2850A-046) | ||
| 31.25 < Analysis Bandwidth < 510 MHz | |||
| 100 MHz to 32 GHz | (MS2850A-047) | ||
| 100 MHz to 44.5 GHz | (MS2850A-046) | ||
| Analysis Bandwidth = 1 GHz | |||
| 4.2 GHz to 32 GHz | (MS2850A-047) | ||
| 4.2 GHz to 44.5 GHz | (MS2850A-046) | ||
| RF Input Connector (Front Panel) | K-J, 500 (nom.) | ||
| Aging Rate | ±1 x l0-7/year | ||
| Max. Input Level |
CW Average Power: +30 dBm (Input Attenuator: >10 dB, Preamp: Off) |
||
| Attenuator | 0 to 60 dB, 2 dB steps | ||
| Phase Noise | |||
| Spectrum Analyzer Function | |||
| Input Frequency | Frequency Offset | SSB Noise | |
| 1 GHz | 10 Hz | -80 dBc/Hz (nom.) | |
| 100 Hz | -92 dBc/Hz (nom.) | ||
| 1 kHz | -117 dBc/Hz (nom.) | ||
| 10 kHz | -123 dBc/Hz | ||
| 100 kHz | -123 dBc/Hz | ||
| 1 MHz | -135 dBc/Hz | ||
| 10 MHz | -148 dBc/Hz (nom.) | ||
| Total Level Accuracy |
Preamp: None, Microwave Preselector Bypass: Off ±0.5 dB (300 kHz < Frequency < 4 GHz) ±1.8 dB (4 GHz < Frequency < 13.8 GHz) ±3.0 dB (13.8 GHz < Frequency < 40 GHz) ±3.5 dB (40 GHz < Frequency < 44.5 GHz, nom.) |
||
| Secondary Harmonic Distortion |
Spectrum Analyzer Function Signal Analyzer Function (Analysis Bandwidth: <31.25 MHz) Preamp: None Low Second Harmonic Distortion: Yes Microwave Preselector Bypass: Off Frequency Band Mode: Spurious |
||
| Input Frequency | Harmonic | SHI | Mixer Input Level |
| 1 GHz | <-65 dBc | >+35 dBm | -30 dBm |
| 4 GHz, 13 GHz | <-90 dBc | >+80 dBm | -10 dBm |
| 20 GHz | <-90 dBc (nom.) | >+80 dBm (nom.) | -10 dBm |
| RBW (Resolution Bandwidth) | |||
| Setting Range: |
1 Hz to 3 MHz (1-3 sequence), 500 Hz, 50 kHz, 2 MHz, 5 MHz, 10 MHz (1 Hz to 10 Hz: Can not be set when Span 0 Hz) |
||
| VBW (Video Bandwidth) | |||
| Setting Range: |
1 Hz to 3 kHz (1-3 sequence), 5 kHz, 10 kHz to 10 MHz (1-3 sequence), Off VBW Mode: Video Average, Power Average |
||
| DANL (Display Average Noise Level) |
Preamp: None Low Second Harmonic Distortion: Yes Microwave Preselector Bypass: On |
||
| Frequency | DANL | ||
| 1 GHz | -150 dBm/Hz | ||
| 4 GHz | -144 dBm/Hz | ||
| 13 GHz | -146 dBm/Hz | ||
| 20 GHz | -140 dBm/Hz | ||
| 28 GHz | -140 dBm/Hz | ||
| 39 GHz | -136 dBm/Hz | ||
| 44 GHz | -130 dBm/Hz (nom.) | ||
| Two-Signal Tertiary Distortion | Preamp: None | ||
| Frequency | Two-Signal Tertiary Distortion | ||
| 1 GHz | <-62 dBc (TOI = +16 dBm) | ||
| 4 GHz | <-60 dBc (TOI = +15 dBm) | ||
| 13 GHz, 20 GHz | <-56 dBc (TOI = +13 dBm) | ||
| 28 GHz, 39 GHz | <-56 dBc (TOI = +13 dBm) (nom.) | ||
| Analysis Bandwidth |
255 MHz (standard) 510 MHz (option) 1 GHz (option) |
||
| Display Functions (Trace Mode) | Spectrum, Power vs. Time, Frequency vs. Time, Phase vs. Time, CCDF, Spectrogram | ||
| ADC Resolution |
Analysis Bandwidth <31.25 MHz: 16 bits Analysis Bandwidth >31.25 MHz: 12 bits |
||
| SFDR (Spurious Free Dynamic Range) | Analysis Bandwidth >31.25 MHz | ||
| Frequency Range | SFDR | ||
| 800 MHz < Frequency < 4.2 GHz | -60 dBc (nom.) | ||
| 4.2 GHz < Frequency < 44.5 GHz | -70 dBc (nom.) | ||
| RBW (Resolution Bandwidth) | |||
| Spectrum Display | |||
| Setting Range: |
Analysis Bandwidth <31.25 MHz: 1 Hz to 1 MHz (1-3 sequence) 50 MHz < Analysis Bandwidth < 62.5 MHz: 3 kHz to 3 MHz (1-3 sequence) Analysis Bandwidth >100 MHz: 10 kHz to 10 MHz (1-3 sequence) |
||
| DANL (Display Average Noise Level) | Analysis Bandwidth >31.25 MHz | ||
| Frequency | Preamp: None | Preamp: On | |
| 1 GHz | -141 dBm/Hz | -160 dBm/Hz | |
| 4 GHz | -138 dBm/Hz | -157 dBm/Hz | |
| 13 GHz | -140 dBm/Hz | -155 dBm/Hz | |
| 20 GHz | -135 dBm/Hz | -152 dBm/Hz | |
| 28 GHz | -135 dBm/Hz | -150 dBm/Hz | |
| 39 GHz | -132 dBm/Hz | -146 dBm/Hz | |
| 44 GHz | -125 dBm/Hz (nom.) | -138 dBm/Hz (nom.) | |
| In-band Frequency Characteristics (Amplitude Flatness) | Analysis Bandwidth >31.25 MHz | ||
| Frequency | Frequency Offset | In-band Frequency Characteristic | |
| 13 GHz | CF ±500 MHz | ±0.7 dB (nom.) | |
| 20 GHz | ±1.0 dB (nom.) | ||
| 28 GHz | ±1.2 dB (nom.) | ||
| 39 GHz, 44 GHz | ±1.25 dB (nom.) | ||
| In-band Phase Linearity (Phase Flatness) |
Analysis Bandwidth >31.25 MHz Preamp: None Offset Frequency ≤ Center Frequency ±500 MHz |
||
| Center Frequency | In-band Phase Linearity | ||
| 13 GHz, 20 GHz, 28 GHz, 39 GHz | 5°p-p (nom.) | ||
| 44 GHz | 6°p-p (nom.) | ||
| Dimensions and Mass | 426 (W) x 177 (H) x 390 (D) mm (excluding protrusions) <21 kg (with MS2850A-046 or 047 and other options installed) | ||
| Power | Power voltage: | 100 V(ac) to 120 V(ac)/200 V(ac) to 240 V(ac) | |
| Frequency: | 50 Hz/60 Hz | ||
| Power Consumption: | <500 VA (with all options installed) 320 VA (nom.) (with MS2850A-047 or 046 and MS2850A-067/068/ 032/033/034 installed, but excluding other options) | ||
| EU Standards (CE Marking) | EMC: EN61326-1, EN61000-3-2 LVD: EN61010-1 RoHS: EN50581 | ||
| OS | Windows 7 (64 bit) | ||
| 5G Measurement Software | Refer to the MX2690xxA Series, MX2830xxA Series, MX2850xxA Series Measurement Software brochure for the specification details. | ||
|
Windows® is a registered trademark of Microsoft Corporation in the USA and other countries. All other product names, models, services trademarks are trademarks or registered trademarks of their respective owners. |
|||
Модели и опции
Товар |
|
|
|
Модели и Опции |
Описание |
Цена | Заказать |
0
| Модели |
|
MS2850A-047
|
Spectrum Analyzer/Signal Analyzer с диапазоном частот от 9 кГц до 32 ГГц
|
По запросу | ||
|
MS2850A-046
|
Spectrum Analyzer/Signal Analyzer с диапазоном частот от 9 кГц до 42,5 ГГц
|
По запросу |
2
| Опции |
|
MS2850A-053
|
Внешний интерфейс для высокоскоростной передачи данных по интерфейсу PCIe
|
По запросу | ||
|
MS2850A-054
|
Внешний интерфейс для высокоскоростной передачи данных по интерфейсу USB3.0
|
По запросу | ||
|
MS2850A-067
|
Обход микроволнового преселектора (стандартная функция)
|
По запросу | ||
|
MS2850A-068
|
Микроволновый предусилитель
|
По запросу | ||
|
MS2850A-072
|
Расширенные спецификации
|
По запросу | ||
|
MS2850A-076
|
Низкий уровень искажений второй гармоники
|
По запросу | ||
|
MS2850A-010
|
Функция измерения фазовых шумов
|
По запросу | ||
|
MS2850A-011
|
Второе устройство для хранения данных
|
По запросу | ||
|
MS2850A-017
|
Функция измерения коэффициента шума
|
По запросу | ||
|
MS2850A-032
|
Полоса анализа сигнала (стандартная)
|
По запросу | ||
|
MS2850A-033
|
Расширение полосы анализа сигнала до 510 МГц
|
По запросу | ||
|
MS2850A-034
|
Расширение полосы анализа сигнала до 1 ГГц
|
По запросу | ||
|
MS2850A-051
|
Функция уменьшения уровня собственных шума
|
По запросу |
Библиотека
Основные сведения о продукте
Посмотреть более подробную информацию о возможностях этого продукта.
