MS2090A

Handheld Spectrum Analyzer delivers the highest continuous frequency coverage and real-time spectrum analysis bandwidth up to 100 MHz to address current and emerging applications

Frequency Range: 9 kHz to 9/14/20/26.5/32/43.5/54 GHz

Anritsu’s Field Master Pro MS2090A real time spectrum analyzer delivers performance never previously available in a compact, handheld instrument. With continuous frequency coverage from 9 kHz to 54 GHz, the Field Master Pro MS2090A is specifically designed to meet the test challenges of a full range of other wireless technologies in use today, including: 5G, LTE, wireless backhaul, aerospace/defense, satellite systems, and radar.

The Field Master Pro MS2090A delivers the highest levels of RF performance available in a handheld, touchscreen spectrum analyzer, with a displayed average noise level (DANL) of -164 dBm and Third Order Intercept (TOI) of +20 dBm (typical). This makes measurements such as spectrum clearing, radio alignment, harmonic, and distortion even more accurate than previously possible. For modulation measurements on digital systems, 100 MHz modulation bandwidth coupled with best-in-class phase noise performance maximizes measurement precision, while ±0.5 dB typical amplitude accuracy provides confidence when testing transmitter power and spurious.

Ruggedized for field use, all versions provide a comprehensive range of features to speed and simplify measurement, as well as enhance usability. RTSA spans of 22 MHz (standard) to 110 MHz (optional) provide capability for cellular interference monitoring to full ISM band signal analysis. In addition to being a full span swept tuned spectrum analyzer, all versions include a spectrogram display that helps monitor the RF spectrum for intermittent or interfering signals. Integrated channel power and occupied bandwidth measurements simplify the measuring and characterizing of common radio transmission. IQ data capture of 5G frames enables the capture and saving of IQ data for off-line processing on a PC using standard data analysis tools.

• 9 kHz to 9/14/20/26.5/32/43.5/54 GHz
• DANL: -164 dBm (with preamp)
• TOI: +20 dBm (typical)
• Analysis bandwidth: 100 MHz
• Amp range: DANL to +30 dBm
• Phase noise at 1 GHz: -110 dBc/Hz @ 100 kHz offset (typical)
• Demodulation: 5GNR, LTE FDD, RF, and modulation quality plus SSB signal analysis
• Resolution bandwidth (RBW): 1 Hz to 10 MHz
• RTSA bandwidth: 22, 55, 110 MHz (option dependent)
• Amplitude accuracy: < 14 GHz ± 1.3 dB (± 0.5 dB, typical)
• Zero span with 60 ns minimum span
• IQ capture and streaming

Atomic Clock External Frequency Reference for Handheld Instruments

With an extremely low power consumption of <200 mW, the MA25401A brings the accuracy and stability of an atomic clock frequency reference to Anritsu’s handheld products. The MA25401A Atomic Clock Frequency Reference has short-term stability (Allan Deviation) of 3.0e–10 @ t = 1 sec, typical long-term aging of <9e–10 per month, and maximum frequency change of ±5e–10 over an operating temperature range of –10 °C to 55 °C. The MA25401A 10 MHz output may be used to synchronize the internal frequency reference to an external reference clock to within 5 ppb accuracy. A USB C interface is used for power.

MA25424A IQ Data Converter is required in order to stream data from the Field Master Pro MS2090A spectrum analyzer to the Bird IQC5000B RF record and playback system.

2000-1985-R Isotropic EMF Probe for use with Option 445

The 2000-1985-R Isotropic EMF Probe, in conjunction with MS2090A Option 445 EMF Meter, offers a broadband EMF measurement from 20 MHz to 40 GHz with excellent accuracy and speed. Simply connect the probe to a USB port on the Field Master Pro, open the EMF Meter application (requires Option 445) and easily measure the EMF energy as a percentage of FCC public, FCC technician, ICNIRP public, or ICNIRP public limits.