КСВН-мост 40 кГц - 4 ГГц, импеданс 50 Ом или 75 Ом (до 2,5 ГГц)

ZRC
Для увеличения картинки наведите мышкой
ZRC
ZRC

Наличие: По запросу

По запросу
По запросу
По запросу

Другие принадлежности ZRC Подробнее




Немецкая компания Rohde & Schwarz основана в 1933 году в Германии, в г. Мюнхен учеными Физико-технического Университета Лотаром Роде и Германом Шварцем.

В нашей стране оборудование Rohde & Schwarz появилось в 1957 году. С тех пор, благодаря собственным технологиям и новаторским идеям сотрудников, Rohde & Schwarz становится одним из технологических лидеров для российских заказчиков различных государственных и силовых структур.

На… подробнее





Обзор
Свернуть Развернуть
Основные возможности и технические характеристики

Key facts

  • Very wide frequency range
  • High directivity
  • Good matching characteristics
  • Rugged design
  • Calibration accessories included
  • Characteristic impedance 50 Ω or 75 Ω (up to 2.5 GHz)
  • Brief description

    The SWR Bridge R&S®ZRC is used to measure the magnitude and phase of the reflection coefficient of RF circuits and components such as filters, amplifiers, mixers and antennas. The output signal from the test generator is applied to the DUT via the SWR bridge. Depending on the reflection coefficient r of the DUT, part of the signal is reflected to the bridge and then routed to the receiver, where it is detected and displayed.

    A shopen (short circuit/open circuit) and a match that can be used for calibration and verification of nominal data are part of the equipment supplied. A connector adapter that can directly connect the bridge to a test generator without the use of cables is also supplied.


    Свернуть Развернуть
    Основные возможности и технические характеристики

    Key facts

  • Very wide frequency range
  • High directivity
  • Good matching characteristics
  • Rugged design
  • Calibration accessories included
  • Characteristic impedance 50 Ω or 75 Ω (up to 2.5 GHz)
  • Brief description

    The SWR Bridge R&S®ZRC is used to measure the magnitude and phase of the reflection coefficient of RF circuits and components such as filters, amplifiers, mixers and antennas. The output signal from the test generator is applied to the DUT via the SWR bridge. Depending on the reflection coefficient r of the DUT, part of the signal is reflected to the bridge and then routed to the receiver, where it is detected and displayed.

    A shopen (short circuit/open circuit) and a match that can be used for calibration and verification of nominal data are part of the equipment supplied. A connector adapter that can directly connect the bridge to a test generator without the use of cables is also supplied.


    Комплектацию Вы можете узнать:
    По тел.: +7 (495) 105 96 88 или
    Написать нам письмо: info@micro-electronics.ru
    Комплектацию Вы можете узнать:
    По тел.: +7 (495) 105 96 88 или
    Написать нам письмо: info@micro-electronics.ru
    Свернуть Развернуть
    Сведения о реестре СИ

    Номер в Госреестре

    Наименование СИ

    Обозначение типа СИ

    Изготовитель

    Срок свидетельства или заводской номер

    Не в реестре
    Свернуть Развернуть
    Сведения о реестре СИ

    Номер в Госреестре

    Наименование СИ

    Обозначение типа СИ

    Изготовитель

    Срок свидетельства или заводской номер

    Не в реестре
    Характеристики
    Загрузить технические характеристики

    Characteristic impedance 50 Ω 75 Ω
    Frequency range 40 kHz to 4 GHz 40 kHz to 2.5 GHz
    Directivity
      up to 2.5 GHz
      2.5 GHz to 3 GHz
      3 GHz to 4 GHz
     
    ≥40 dB
    ≥40 dB
    ≥36 dB
     
    ≥40 dB

    Return loss at test port
      up to 400 kHz
      400 kHz to 2.5 GHz
      2.5 GHz to 3 GHz
      3 GHz to 4 GHz
     
    ≥12 dB + 11 dB · log (f/40 kHz)
    ≥23 dB
    ≥23 dB
    ≥20 dB
     
    ≥8 dB + 12 dB · log (f/40 kHz)
    ≥20 dB

    Measurement error
      up to 400 kHz
      400 kHz to 2.5 GHz
      2.5 GHz to 3 GHz
      3 GHz to 4 GHz
     
    ≤0.01 + s · |r|2
    ≤0.01 + 0.07 · |r|2
    ≤0.01 + 0.07 · |r|2
    ≤0.016 + 0.01 · |r|2
     
    ≤0.01 + s · |r|2
    ≤0.01 + 0.1 · |r|2

    Insertion loss at 5 MHz
      Total
      Input → test port
      Test port → output
     
    13 dB
    7 dB
    6 dB
    General data
    Power-handling capacity 0.5 W
    Operating temperature range 0°C to +55°C
    Storage temperature range –40°C to +70°C
    Connectors N female
    Test port connector N female or N male
    Dimensions without connectors 72 mm × 77 mm × 23 mm
    Length of connectors female 17 mm, male 19 mm
    Weight 340 g
    Dimensions of case 264 mm × 172 mm × 48 mm
    Total weight with accessories and case 980 g

    s = reflection coefficient at test port (s = 10 –a/20 dB)

    a = return loss at test port

    |r| = magnitude of reflection coefficient measured

    Модели и опции
    Товар
    Модели и Опции
    Описание
    Цена Заказать
    Модели
    ZRC
    R&S ZRC SWR Brigde, Measurement of reflection coefficient from 40 кГц - 4 ГГц, Characteristic impedance 50 Ом или 75 Ом (up - 2.5 ГГц)
    По запросу
    - шт +
    R&S® ZRC.52
    R&S ZRC SWR Brigde, Measurement of reflection coefficient from 40 кГц - 4 ГГц, Characteristic impedance 50 Ом или 75 Ом (up - 2.5 ГГц)
    По запросу
    - шт +
    Библиотека

    Основные сведения о продукте

    Посмотреть более подробную информацию о возможностях этого продукта.

    Технические характеристики

    Отзывы
    Добавить отзыв
    Оцените товар:
    Ваше имя
    Достоинства

    Недостатки

    Комментарий

    Символы на картинке


    Тут еще никто ничего не писал, стань первым!
    Список просмотренных товаров пуст
    Список избранного пуст
    Ваша корзина пуста
    Помощь
    Ошибка на сайте? Выдели её и нажми Ctrl+Enter