Широкополосный мониторинговый приемник 9 кГц - 40 ГГц Rohde & Schwarz ESMD

ESMD
Для увеличения картинки наведите мышкой
ESMDESMDESMD
ESMDESMDESMD
НаличиеПо запросу
По запросу
По запросу
По запросу
Приемники мониторинговые ESMD Подробнее
Обзор
Свернуть Развернуть
Основные возможности и технические характеристики

Key Facts

  • ITU-compliant measurements and applications for security authorities and organizations
  • Wide frequency range: from 8 kHz to 40 GHz (base unit: 20 MHz to 3.6 GHz)
  • Up to 80 MHz realtime bandwidth (base unit: 20 MHz)
  • Time domain analysis up to 20 MHz bandwidth
  • Realtime event capture (REC) for I/Q recordings and realtime replay
  • Various result displays
  • Integration into customer-specific software packages from third-party suppliers thanks to open, documented remote control interface and data formats
  • Internal recording and replay of spectra and waterfall data (for receivers with front panel operation or for external R&S®ESMD GUI software)
  • Map display with GNSS position (for receivers with front panel operation or for external R&S®ESMD GUI software)

  • Features & Benefits

     Frequency range from 8 kHz to 40 GHz

  • One radiomonitoring receiver for ”all” frequencies
  • Base unit: 20 MHz to 3.6 GHz
  • R&S®ESMD-HF: option for HF signal reception down to 8 kHz
  • R&S®ESMD-SHF: option for SHF signal reception up to 26.5 GHz
  • Same size, even with the above frequency options installed (19" width, 4 HU)
  • R&S®MC40: external microwave downconverter for frequencies up to 40 GHz

  • Integrated antenna switch

  • Two separate inputs for HF (2) and VHF/UHF (3)
  • One SHF input
  • Automatic switching between antennas as a function of selected frequency, even during scanning
  • Easy definition of antenna and cable parameters

  • Powerful preselection: large-signal immunity and high sensitivity

  • Reliable protection against overloading due to strong signals
  • Outstanding sensitivity due to high-gain preamplifier stage
  • Ideal radiomonitoring receiver with wide dynamic range for all signal scenarios
  • Smooth operation, e.g. with a wideband receiving antenna (responsible for high signal sum load at receiver input)

  • FFT signal processing with 80 MHz realtime bandwidth (base unit: 20 MHz)

  • Realtime spectrum for detecting pulsed and frequency agile signals
  • FFT signal processing for fine frequency resolution and high sensitivity
  • FPGA implementation for top processing speed with fine resolution and sensitivity

  • Extremely fast spectral scan (panorama scan) across entire frequency range

  • Extremely fast FFT scan
  • Fast spectrum overview with extremely fine resolution bandwidth
  • Combination of spectral results and waterfall display
  • Optimal determination of frequency range of interest from an unknown starting position

  • Waterfall diagram for examination of signal history

  • Three-dimensional display of spectrum over frequency, time and color-coded signal level
  • History mode function to stop the waterfall and display a previous spectrum
  • Outstanding visual presentation of pulsed or frequency agile signals
  • Settable time resolution of waterfall (speed)

  • Recording of spectra and waterfall data and replay of results

  • Recording of spectra and waterfall data, e.g. on a USB flash drive
  • Replay of recorded content for detailed evaluation of signals contained in spectrum
  • Identical receiver and parameter settings in recording and replay modes
  • For receivers with front panel operation or for external R&S®ESMD GUI software

  • Map display with GNSS position

  • Map display of current receiver location
  • Selectable display of recorded results (e.g. spectra) relative to a position
  • Map material based on OpenStreetMap (OSM)

  • Polychrome spectrum to distinguish superimposed, pulsed signals

  • Display of time behavior (frequency of occurrence) of pulsed signals using color coding (for all realtime bandwidths)
  • Settable occurrence frequency threshold
  • Separate display of pulsed signals (superimposed in frequency, time and level)

  • Video spectrum for display of subcarriers and transmission rates

  • Spectrum display of demodulated signal
  • Clear display of subcarriers, e.g. 19 kHz pilot tone
  • Squared video spectrum to estimate the transmission rate (baud rate) of a digitally modulated signal
  • Combination of spectral results and waterfall display

  • Parallel signal processing of spectral path and demodulation path

  • Two parallel signal processing paths for spectrum and demodulation
  • Interference-free demodulation with parallel display of realtime spectrum and waterfall display
  • Seamless I/Q baseband data stream for signal analysis
  • Independent setting of bandwidth and center frequency


  • Level measurements with ”real” wideband detector

  • Wideband level measurements up 20 MHz bandwidth for sophisticated, digitally modulated signals

  • Frequency scan and memory scan for audio demodulation on changing channels

  • Frequency scan: continuous scanning of adjacent channels, automatic demodulation of channels where level exceeds squelch, e.g. in ATC band
  • Memory scan: scanning of different radio services with variable step size and demodulation mode
  • Convenient search for active signals and quick availability of audio content

  • 4+1 receivers in one instrument

  • R&S®ESMD-DDC option: four additional demodulation channels
  • Five software receivers in one instrument thanks to five demodulation channels (anywhere within realtime bandwidth)
  • Output of demodulated data as separate data streams via LAN interface

  • Time domain analysis up to 20 MHz bandwidth

  • R&S®ESMD-ZS option: time domain analysis (zero span)
  • Amplitude and instantaneous frequency display for detailed signal analysis
  • Selection of a 20 MHz wide signal within the 80 MHz realtime bandwidth

  • Open interfaces for remote control and data transmission

  • Two 1 Gbit Ethernet LAN interfaces for receiver remote control and result processing using Rohde & Schwarz system software (e.g. R&S®ARGUS 6.1, R&S®RAMON, R&S®CA100)
  • R&S®RX-10G option: retrofittable 10 Gbit Ethernet LAN interface
  • Documented interface description for flexible programming and data processing, even with customerspecific software package

  • Receiver remote control and data recording

  • R&S®ESMD-Control software package (included in scope of delivery) for receiver remote control via 1 Gbit LAN interface
  • Documentation of results on a PC (e.g. spectra and audio content), also for replaying recorded data for offline analysis

  • Interfaces for up to 80 MHz wide I/Q data streaming

  • R&S®ESMD-Control software package for receiver remote control via 1 Gbit LAN interface
  • Documentation of results on a PC (e.g. spectra and audio content), also for replaying recorded data for offline analysis

  • Multichannel signal detection and analysis in a networked system

  • R&S®ESMD-SP option: hardware-accelerated multichannel processing of I/Q data streams via 1 Gbit LAN interface, e.g. for multichannel content recovery and detection of fixed frequency and frequency agile signals
  • Further processing in a networked system, e.g. in combination with R&S®CA120 and suitable options
  • Documented interface description for flexible programming and data processing, even with third-party software package

  • ITU-compliant measurements in the receiver

  • R&S®ESMD-IM option: ITU-compliant measurements on signal parameters for AM, FM and PM-modulated signals (e.g. modulation index, occupied bandwidth and phase deviation)
  • Offline measurements on digitally modulated signals using the R&S®CA100IS software and suitable options (in line with ITU recommendation SM1600)

  • Detection of selective call services

  • R&S®ESMD-SL option: detection of audio-based selective calls and listing of received selective call standards
  • Result filtering according to relevant standards

  • DC operation (e.g. on vehicle battery)

  • R&S®ESMD-DC option: DC power supply (12 V to 32 V DC)
  • Space-saving vehicle installation


  • System time synchronization using NTP server

  • Time and date synchronization using an NTP server for simultaneous control of multiple receivers in a networked system
  • Easy comparison of measurement results received by different stations

  • TDOA ready with high-accuracy timestamps and GNSS synchronization of frequency and time

  • R&S®ESMD-IGT2 option: synchronization of receiver frequency and time using internal GNSS module
  • High-accuracy timestamps in I/Q baseband data stream for use in TDOA systems

  • Recording and replaying of up to 80 MHz wide I/Q data

  • Never miss an event: activation of recordings with flexible realtime event capture (REC)
  • Signals as received from an antenna: all receiver functions available when replaying I/Q data
  • Detailed display: replay of I/Q data with increased time resolution
  • Realtime replay of recorded data
  • Bring RF to the lab: Stream wideband I/Q data to Rohde & Schwarz signal generators
  • Use all functions with Rohde & Schwarz digital wideband storage devices

  • Single-channel direction finder upgrade kit

  • R&S®ESMD-DF option: upgrade to single-channel direction finder
  • Direction finding of signals in frequency range up to 6 GHz
  • Reliable DF results even in difficult environments (e.g. urban areas with up to 50 % reflection)
  • Parallel direction finding of all emissions within 20 MHz realtime bandwidth

  • Documentation of calibration values

  • R&S®ESMD-DCV option: documentation of calibration values with calibration certificate from final production testing for a specific serial number
  • Calibration label for instrument
  • Brief Description

    The R&S®ESMD wideband monitoring receiver was specially developed for signal search, radiomonitoring, radio detection and spectrum monitoring tasks. It performs ITU-compliant measurements and meets the requirements of security authorities and organizations. The receiver is ideal for both stationary and mobile/vehicular applications because it can be operated via the front panel or remotely controlled via LAN.



    Свернуть Развернуть
    Основные возможности и технические характеристики

    Key Facts

  • ITU-compliant measurements and applications for security authorities and organizations
  • Wide frequency range: from 8 kHz to 40 GHz (base unit: 20 MHz to 3.6 GHz)
  • Up to 80 MHz realtime bandwidth (base unit: 20 MHz)
  • Time domain analysis up to 20 MHz bandwidth
  • Realtime event capture (REC) for I/Q recordings and realtime replay
  • Various result displays
  • Integration into customer-specific software packages from third-party suppliers thanks to open, documented remote control interface and data formats
  • Internal recording and replay of spectra and waterfall data (for receivers with front panel operation or for external R&S®ESMD GUI software)
  • Map display with GNSS position (for receivers with front panel operation or for external R&S®ESMD GUI software)

  • Features & Benefits

     Frequency range from 8 kHz to 40 GHz

  • One radiomonitoring receiver for ”all” frequencies
  • Base unit: 20 MHz to 3.6 GHz
  • R&S®ESMD-HF: option for HF signal reception down to 8 kHz
  • R&S®ESMD-SHF: option for SHF signal reception up to 26.5 GHz
  • Same size, even with the above frequency options installed (19" width, 4 HU)
  • R&S®MC40: external microwave downconverter for frequencies up to 40 GHz

  • Integrated antenna switch

  • Two separate inputs for HF (2) and VHF/UHF (3)
  • One SHF input
  • Automatic switching between antennas as a function of selected frequency, even during scanning
  • Easy definition of antenna and cable parameters

  • Powerful preselection: large-signal immunity and high sensitivity

  • Reliable protection against overloading due to strong signals
  • Outstanding sensitivity due to high-gain preamplifier stage
  • Ideal radiomonitoring receiver with wide dynamic range for all signal scenarios
  • Smooth operation, e.g. with a wideband receiving antenna (responsible for high signal sum load at receiver input)

  • FFT signal processing with 80 MHz realtime bandwidth (base unit: 20 MHz)

  • Realtime spectrum for detecting pulsed and frequency agile signals
  • FFT signal processing for fine frequency resolution and high sensitivity
  • FPGA implementation for top processing speed with fine resolution and sensitivity

  • Extremely fast spectral scan (panorama scan) across entire frequency range

  • Extremely fast FFT scan
  • Fast spectrum overview with extremely fine resolution bandwidth
  • Combination of spectral results and waterfall display
  • Optimal determination of frequency range of interest from an unknown starting position

  • Waterfall diagram for examination of signal history

  • Three-dimensional display of spectrum over frequency, time and color-coded signal level
  • History mode function to stop the waterfall and display a previous spectrum
  • Outstanding visual presentation of pulsed or frequency agile signals
  • Settable time resolution of waterfall (speed)

  • Recording of spectra and waterfall data and replay of results

  • Recording of spectra and waterfall data, e.g. on a USB flash drive
  • Replay of recorded content for detailed evaluation of signals contained in spectrum
  • Identical receiver and parameter settings in recording and replay modes
  • For receivers with front panel operation or for external R&S®ESMD GUI software

  • Map display with GNSS position

  • Map display of current receiver location
  • Selectable display of recorded results (e.g. spectra) relative to a position
  • Map material based on OpenStreetMap (OSM)

  • Polychrome spectrum to distinguish superimposed, pulsed signals

  • Display of time behavior (frequency of occurrence) of pulsed signals using color coding (for all realtime bandwidths)
  • Settable occurrence frequency threshold
  • Separate display of pulsed signals (superimposed in frequency, time and level)

  • Video spectrum for display of subcarriers and transmission rates

  • Spectrum display of demodulated signal
  • Clear display of subcarriers, e.g. 19 kHz pilot tone
  • Squared video spectrum to estimate the transmission rate (baud rate) of a digitally modulated signal
  • Combination of spectral results and waterfall display

  • Parallel signal processing of spectral path and demodulation path

  • Two parallel signal processing paths for spectrum and demodulation
  • Interference-free demodulation with parallel display of realtime spectrum and waterfall display
  • Seamless I/Q baseband data stream for signal analysis
  • Independent setting of bandwidth and center frequency


  • Level measurements with ”real” wideband detector

  • Wideband level measurements up 20 MHz bandwidth for sophisticated, digitally modulated signals

  • Frequency scan and memory scan for audio demodulation on changing channels

  • Frequency scan: continuous scanning of adjacent channels, automatic demodulation of channels where level exceeds squelch, e.g. in ATC band
  • Memory scan: scanning of different radio services with variable step size and demodulation mode
  • Convenient search for active signals and quick availability of audio content

  • 4+1 receivers in one instrument

  • R&S®ESMD-DDC option: four additional demodulation channels
  • Five software receivers in one instrument thanks to five demodulation channels (anywhere within realtime bandwidth)
  • Output of demodulated data as separate data streams via LAN interface

  • Time domain analysis up to 20 MHz bandwidth

  • R&S®ESMD-ZS option: time domain analysis (zero span)
  • Amplitude and instantaneous frequency display for detailed signal analysis
  • Selection of a 20 MHz wide signal within the 80 MHz realtime bandwidth

  • Open interfaces for remote control and data transmission

  • Two 1 Gbit Ethernet LAN interfaces for receiver remote control and result processing using Rohde & Schwarz system software (e.g. R&S®ARGUS 6.1, R&S®RAMON, R&S®CA100)
  • R&S®RX-10G option: retrofittable 10 Gbit Ethernet LAN interface
  • Documented interface description for flexible programming and data processing, even with customerspecific software package

  • Receiver remote control and data recording

  • R&S®ESMD-Control software package (included in scope of delivery) for receiver remote control via 1 Gbit LAN interface
  • Documentation of results on a PC (e.g. spectra and audio content), also for replaying recorded data for offline analysis

  • Interfaces for up to 80 MHz wide I/Q data streaming

  • R&S®ESMD-Control software package for receiver remote control via 1 Gbit LAN interface
  • Documentation of results on a PC (e.g. spectra and audio content), also for replaying recorded data for offline analysis

  • Multichannel signal detection and analysis in a networked system

  • R&S®ESMD-SP option: hardware-accelerated multichannel processing of I/Q data streams via 1 Gbit LAN interface, e.g. for multichannel content recovery and detection of fixed frequency and frequency agile signals
  • Further processing in a networked system, e.g. in combination with R&S®CA120 and suitable options
  • Documented interface description for flexible programming and data processing, even with third-party software package

  • ITU-compliant measurements in the receiver

  • R&S®ESMD-IM option: ITU-compliant measurements on signal parameters for AM, FM and PM-modulated signals (e.g. modulation index, occupied bandwidth and phase deviation)
  • Offline measurements on digitally modulated signals using the R&S®CA100IS software and suitable options (in line with ITU recommendation SM1600)

  • Detection of selective call services

  • R&S®ESMD-SL option: detection of audio-based selective calls and listing of received selective call standards
  • Result filtering according to relevant standards

  • DC operation (e.g. on vehicle battery)

  • R&S®ESMD-DC option: DC power supply (12 V to 32 V DC)
  • Space-saving vehicle installation


  • System time synchronization using NTP server

  • Time and date synchronization using an NTP server for simultaneous control of multiple receivers in a networked system
  • Easy comparison of measurement results received by different stations

  • TDOA ready with high-accuracy timestamps and GNSS synchronization of frequency and time

  • R&S®ESMD-IGT2 option: synchronization of receiver frequency and time using internal GNSS module
  • High-accuracy timestamps in I/Q baseband data stream for use in TDOA systems

  • Recording and replaying of up to 80 MHz wide I/Q data

  • Never miss an event: activation of recordings with flexible realtime event capture (REC)
  • Signals as received from an antenna: all receiver functions available when replaying I/Q data
  • Detailed display: replay of I/Q data with increased time resolution
  • Realtime replay of recorded data
  • Bring RF to the lab: Stream wideband I/Q data to Rohde & Schwarz signal generators
  • Use all functions with Rohde & Schwarz digital wideband storage devices

  • Single-channel direction finder upgrade kit

  • R&S®ESMD-DF option: upgrade to single-channel direction finder
  • Direction finding of signals in frequency range up to 6 GHz
  • Reliable DF results even in difficult environments (e.g. urban areas with up to 50 % reflection)
  • Parallel direction finding of all emissions within 20 MHz realtime bandwidth

  • Documentation of calibration values

  • R&S®ESMD-DCV option: documentation of calibration values with calibration certificate from final production testing for a specific serial number
  • Calibration label for instrument
  • Brief Description

    The R&S®ESMD wideband monitoring receiver was specially developed for signal search, radiomonitoring, radio detection and spectrum monitoring tasks. It performs ITU-compliant measurements and meets the requirements of security authorities and organizations. The receiver is ideal for both stationary and mobile/vehicular applications because it can be operated via the front panel or remotely controlled via LAN.



    Комплектацию Вы можете узнать:
    По тел.: +7 (495) 105 96 88 или
    Написать нам письмо: info@micro-electronics.ru
    Комплектацию Вы можете узнать:
    По тел.: +7 (495) 105 96 88 или
    Написать нам письмо: info@micro-electronics.ru
    Свернуть Развернуть
    Сведения о реестре СИ

    Номер в Госреестре

    Наименование СИ

    Обозначение типа СИ

    Изготовитель

    Срок свидетельства или заводской номер

    52164-12
    Приемники измерительные широкополосные
    R&S ESMD
    Фирма "Rohde & Schwarz GmbH & Co. KG", Германия
    01.11.2022
    Свернуть Развернуть
    Сведения о реестре СИ

    Номер в Госреестре

    Наименование СИ

    Обозначение типа СИ

    Изготовитель

    Срок свидетельства или заводской номер

    52164-12
    Приемники измерительные широкополосные
    R&S ESMD
    Фирма "Rohde & Schwarz GmbH & Co. KG", Германия
    01.11.2022
    Характеристики
    Загрузить технические характеристики

    Frequency range
    base unit 20 MHz to 3.6 GHz
    with R&S®ESMD-HF option 8 kHz to 3.6 GHz
    with R&S®ESMD-SHF option 20 MHz to 26.5 GHz
    in combination with R&S®MC40 20 MHz to 40 GHz
    with R&S®ESMD-HF and R&S®ESMD-SHF options 8 kHz to 26.5 GHz
    in combination with R&S®MC40 8 MHz to 40 GHz
    IF bandwidths
    demodulation, level and offset measurement
    (3 dB bandwidth), 34 filters
    100/150/300/600 Hz,
    1/1.5/2.1/2.4/2.7/3.1/4/4.8/6/9/12/15/30/50/120/
    150/250/300/500/800 kHz,
    1/1.25/1.5/2/5/8/10/12.5/15/20 MHz
    Demodulation
    all IF bandwidths AM, FM, φM, pulse, ISB, I/Q, analog TV
    IF bandwidths ≤ 9 kHz LSB, USB, CW, ISB
    Realtime spectrum (IF panorama)
    FFT IF panorama gap-free, dynamically overlapping FFT
      operating mode: automatic or variable with selectable frequency resolution
    0.625/1.25/2.5/3.125/6.25/12.5/25/31.25/50/
    62.5/100/125/200/250/312.5/500/ 625 Hz,
    1/1.25/2/2.5/3.125/5/6.25/8.333/10/12.5/20/25/
    50/100/200/500 kHz, 1/2 MHz
    Span (base unit) 1/2/5/10/20/50/100/200/500 kHz,
    1/2/5/10/20 MHz
    Spectrum span (with R&S®ESMD-ADC2 and R&S®ESMD-WB options additionally 40 MHz and 80 MHz
    Spectrum display clear/write, average, max. hold, min. hold, histogram, pulse
    Scan characteristics
    Memory scan 10 000 programmable memory locations
      (speed) up to 1200 channels/s
    Frequency scan user-selectable start/stop frequency and step size
      (speed) up to 1500 channels/s
    Panorama scan  
    with R&S®ESMD-PS option RF spectrum with user-selectable start/stop frequency and step size:
    100/125/200/250/500/625 Hz,
    1/1.25/2/2.5/3.125/5/6.25/8.333/10/12.5/20/25/
    50/100/200/500 kHz, 1/2 MHz
    speed up to 270 GHz/s (in-band)
      up to 850 GHz/s (in-band) with 80 MHz option
    Модели и опции
    Товар
    Модели и Опции
    Описание
    Цена Заказать
    Модели
    R&S ESMD
    Широкополосный мониторинговый приемник 9 кГц - 40 ГГц
    По запросу
    - шт +
    Accessories
    R&S®MC40
    Microwave Converter 40 GHz
    По запросу
    - шт +
    R&S®GX460
    Digital Wideband Storage Device (up to 40 MHz IFBW recording)
    По запросу
    - шт +
    R&S®GX465
    Digital Wideband Storage Device (up to 80 MHz IFBW recording)
    По запросу
    - шт +
    R&S®ZZA-411
    19" Rack Adapter
    По запросу
    - шт +
    R&S®GX460-OCG
    Optical Cable, for 10 Gbit, incl. two optical transceivers, length: 20 m
    По запросу
    - шт +
    R&S®GX460-CCG
    Copper Cable, for 10 Gbit, incl. two transceivers, length: 5 m
    По запросу
    - шт +
    Options
    R&S®ESMD-IM
    ITU Measurement Software
    По запросу
    - шт +
    R&S®ESMD-ZS
    Zero Span
    По запросу
    - шт +
    R&S®ESMD-SL
    Selective Call Analysis
    По запросу
    - шт +
    R&S®ESMD-ADC2
    Multifunction Board
    По запросу
    - шт +
    R&S®ESMD-WB
    80 MHz IF Panorama Bandwidth
    По запросу
    - шт +
    R&S®ESMD-DDC
    Digital Downconverter
    По запросу
    - шт +
    R&S®ESMD-DF
    Direction Finder Upgrade Kit
    По запросу
    - шт +
    R&S®ESMD-COR
    DF Error Correction
    По запросу
    - шт +
    R&S®ESMD-DC
    DC Power Supply
    По запросу
    - шт +
    R&S®ESMD-DIQ
    Wideband I/Q Data Streaming Board
    По запросу
    - шт +
    R&S®RX-10G
    10 Gbit Ethernet Interface (without transceiver module)
    По запросу
    - шт +
    R&S®RX-40G
    40 Gbit I/Q Interface
    По запросу
    - шт +
    R&S®ESMD-IGT2
    Internal GNSS Module (GPS, Glonass, BeiDou)
    По запросу
    - шт +
    R&S®ESMD-RR
    Record and Replay
    По запросу
    - шт +
    R&S®ESMD-SSD
    Internal SSD
    По запросу
    - шт +
    R&S®ESMD-HF
    HF Frequency Range Extension, 8 kHz to 32 MHz
    По запросу
    - шт +
    R&S®ESMD-SHF
    SHF Frequency Range Extension, 3.6 GHz to 26.5 GHz
    По запросу
    - шт +
    R&S®ESMD-PS
    Panorama Scan
    По запросу
    - шт +
    R&S®ESMD-IR
    Internal Recording
    По запросу
    - шт +
    R&S®ESMD-Map
    Map Display
    По запросу
    - шт +
    Ordering information
    R&S®ESMD
    Wideband Monitoring Receiver, with front panel control
    По запросу
    - шт +
    R&S®ESMD-DCV
    Documentation of Calibration Values
    По запросу
    - шт +
    Options for hardware-accelerated signal processing (in combination with R&S®CA120)
    R&S®ESMD-SP
    Signal Processing Board
    По запросу
    - шт +
    R&S®ESMD-DDCE
    DDC Signal Extraction
    По запросу
    - шт +
    R&S®ESMD-HRP
    High-Resolution Panorama Spectrum
    По запросу
    - шт +
    R&S®ESMD-ST
    Detection of Short-Time Signals
    По запросу
    - шт +
    Библиотека

    Основные сведения о продукте

    Посмотреть более подробную информацию о возможностях этого продукта.

    Технические характеристики

    Отзывы
    Добавить отзыв
    Оцените товар:
    Ваше имя
    Достоинства

    Недостатки

    Комментарий

    Символы на картинке


    Тут еще никто ничего не писал, стань первым!
    Список просмотренных товаров пуст
    Список избранного пуст
    Ваша корзина пуста
    Помощь
    Ошибка на сайте? Выдели её и нажми Ctrl+Enter